LumberJocks

Cleaned and rearranged the Wood Hole and added an air filter

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by bigarm posted 01-27-2016 12:46 AM 578 views 0 times favorited 8 replies Add to Favorites Watch
View bigarm's profile

bigarm

62 posts in 566 days


01-27-2016 12:46 AM


8 replies so far

View conifur's profile

conifur

955 posts in 617 days


#1 posted 01-27-2016 12:53 AM

Looks nice, air filter looks a bit small, how many CFM?

-- Knowledge and experience equals Wisdom, Michael Frankowski

View Patrick A. Moran's profile

Patrick A. Moran

3 posts in 326 days


#2 posted 01-27-2016 12:56 AM

What a nice looking shop.I bet you have a good time in there.

-- Paddy North Carolina http://wwwPwoody70

View bigarm's profile

bigarm

62 posts in 566 days


#3 posted 01-27-2016 01:07 AM

The air filtration has three speeds 300-400 cfm depending on speed. The shop is only about 9’ x 29’, but the ceilings are tall. Spent the day rearranging things and putting in the MFT/3. Actually seems like there is more room now after rearranging and adding in the table than before.

View conifur's profile

conifur

955 posts in 617 days


#4 posted 01-27-2016 01:18 AM

Losts of wall space, I think that is better then lots of open space, dont have to walk around what ever when its against a wall.

-- Knowledge and experience equals Wisdom, Michael Frankowski

View Bobsboxes's profile

Bobsboxes

1107 posts in 2129 days


#5 posted 01-27-2016 01:29 AM

Nice shop.

-- Bob in Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain

View Luthierman's profile

Luthierman

157 posts in 553 days


#6 posted 01-27-2016 01:34 AM

Just wondering, wheres the table saw? Have you figured out a way that festool eliminates the need? I have been trying to figure that out for a while. I tried the parallel guides but it just isn’t conducive for efficient setup and repeat ability.

Nice shop by the way. I like nice and tidy organization.

-- Jesse, West Lafayette, Indiana

View bigarm's profile

bigarm

62 posts in 566 days


#7 posted 01-27-2016 01:59 AM



Just wondering, wheres the table saw? Have you figured out a way that festool eliminates the need? I have been trying to figure that out for a while. I tried the parallel guides but it just isn t conducive for efficient setup and repeat ability.

Nice shop by the way. I like nice and tidy organization.

- Luthierman

Impossible to see in those pictures. It is actually in front of those drawers in the workbench at the back of the shop. There is a built in workbench with 12 drawers, then a small space, then the saw (Delta 36-725), then an assembly table with a t track top butted up to the saw. You can kind of see the assembly table. It has the glue on it. Have had the track saw for a few months but just picked up the MFT.

View Woodchuck2010's profile

Woodchuck2010

513 posts in 324 days


#8 posted 03-04-2016 05:30 PM

I really like your shop.
Way more room than I have. Where’s the jointer going to go?

-- Chuck, Michigan,

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com