Ebay - Shopsmith for sale - Texas local pickup only

« back to Woodworking Trade & Swap forum

56 posts in 2249 days

02-01-2010 07:08 PM

Topic tags/keywords: shopsmith

I just saw this posting for someone selling a shopsmith on Ebay it has 5 days from Today Feb 1st. The kicker is they will not ship it and it is in Boerne, TX, so someone living in Texas may be able to get a heck of a deal for this item.
1950 ShopSmith Mark V on Ebay
Good Luck
Kelly

-- Kelly -- Common Sense, Isn't Common to Everyone. - Me

4 replies so far

hairy home \| projects \| blog 2109 posts in 2350 days #1 posted 02-01-2010 10:09 PM	I see old units like that on craigslist in the $200 – $300 range occasionally. If I had the room, I could find a use for one. If I was starting out, I’d be on that like a duck on a junebug. -- in the confusion, I mighta grabbed the gold ...
Tuuek home \| projects \| blog 56 posts in 2249 days #2 posted 02-02-2010 03:00 AM	Hopefully someone will be able to pick it up cheap. I have seen a few of them here in VA in the Richmond area for sale but havent been able to look into them. -- Kelly -- Common Sense, Isn't Common to Everyone. - Me
a1Jim home \| projects \| blog 113061 posts in 2394 days #3 posted 02-04-2010 07:32 AM	Seems like an oldie all right -- http://artisticwoodstudio.com Custom furniture
Tuuek home \| projects \| blog 56 posts in 2249 days #4 posted 02-11-2010 04:05 PM	I just saw that the final bid was $305.00. What a deal. -- Kelly -- Common Sense, Isn't Common to Everyone. - Me

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	10215
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	940
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	182
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	194
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	578
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	2951
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	4880
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	20890
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	57
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	3553
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	937
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	4356
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1075
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	1466
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1001
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	3651
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1891
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	7526

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
BIG SEXY	maplerock	03-01-2015 11:45 PM	by Roger	sign in to get readership tracking
The Stumpy Nubs Workshop- Woodworking infotainment at it's best!	StumpyNubs	03-01-2015 11:44 PM	by Monte Pittman	sign in to get readership tracking
Cherry End tables with inlays	Willie Wolf	03-01-2015 11:43 PM		sign in to get readership tracking
Off-topic content. Click to see the post.	chrisstef	03-01-2015 11:41 PM	by Mosquito	sign in to get readership tracking
Kitchen Hutch	geekwoodworker	03-01-2015 11:35 PM	by geekwoodworker	sign in to get readership tracking
Off-topic content. Click to see the post.	Dan'um Style	03-01-2015 11:35 PM	by RobS888	sign in to get readership tracking
Greene & Greene Inspired Coffee Table	Willie Wolf	03-01-2015 11:33 PM	by Willie Wolf	sign in to get readership tracking
Black Locust Scoop and Bowl #93	Jim Jakosh	03-01-2015 11:32 PM	by Jim Jakosh	sign in to get readership tracking
1950s Cass Toy Co Chest Restoration #1: Research and Documentation	JenTWG	03-01-2015 11:31 PM	by JenTWG	sign in to get readership tracking
Downdraft / Outfeed Table	HickoryHill	03-01-2015 11:29 PM	by McDustmaker	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

BIG SEXY

maplerock

03-01-2015 11:45 PM

by Roger

to get readership tracking

The Stumpy Nubs Workshop- Woodworking infotainment at it's best!

StumpyNubs

03-01-2015 11:44 PM

by Monte Pittman

to get readership tracking

Cherry End tables with inlays

Willie Wolf

03-01-2015 11:43 PM

to get readership tracking

Off-topic content. Click to see the post.

chrisstef

03-01-2015 11:41 PM

by Mosquito

to get readership tracking

Kitchen Hutch

geekwoodworker

03-01-2015 11:35 PM

by geekwoodworker

to get readership tracking

Off-topic content. Click to see the post.

Dan'um Style

03-01-2015 11:35 PM

by RobS888

to get readership tracking

Greene & Greene Inspired Coffee Table

Willie Wolf

03-01-2015 11:33 PM

by Willie Wolf

to get readership tracking

Black Locust Scoop and Bowl #93

Jim Jakosh

03-01-2015 11:32 PM

by Jim Jakosh

to get readership tracking

1950s Cass Toy Co Chest Restoration #1: Research and Documentation

JenTWG

03-01-2015 11:31 PM

by JenTWG

to get readership tracking

Downdraft / Outfeed Table

HickoryHill

03-01-2015 11:29 PM

by McDustmaker

to get readership tracking

Ebay - Shopsmith for sale - Texas local pickup only

4 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...