LumberJocks

Grizzly G1022 spare parts

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by Walnutbeard posted 01-05-2016 02:38 AM 3909 views 0 times favorited 20 replies Add to Favorites Watch
View Walnutbeard's profile

Walnutbeard

3 posts in 709 days


01-05-2016 02:38 AM

After getting a few good cuts on my Grizzly G1022 I found some hidden issues with it. The Arbor bracket was broke around the arbor bracket shift from someone hammering it in. The front Trunnion also had some gear teeth that had cracks running deep in them. Then the stop block broke off with a few of the teeth. It was my first time buying a used table saw and really didn’t understand what a super thoroughly inspection was. I have some spare parts feel free to make a offer if you are interested. I’d like to help some one out with parts versus junking the whole saw .!


20 replies so far

View Moron's profile

Moron

5032 posts in 3726 days


#1 posted 01-19-2016 05:42 AM

my favourite tool
be it old or new goes uphill

-- "Good artists borrow, great artists steal”…..Picasso

View joesflooring's profile

joesflooring

1 post in 567 days


#2 posted 05-22-2016 03:02 PM

i am interested in the front bracket if you still have it

View knotscott's profile

knotscott

7782 posts in 3208 days


#3 posted 05-22-2016 03:29 PM

It’s worth noting that the G1022 came out of the same Mao Shan factory in Taiwan as contractor saws under many other names, and I’d guess that many of the parts are interchangeable – older Jet, Allied, older PM, Ohio Forge, Omega, AFF, Bridgewood, Mao Shan, Woodtek, and likely older GI. It’s not too hard to identify the ones that are similar. I can’t guarantee it, but could be worth a shot.







-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Quanter50's profile

Quanter50

278 posts in 2129 days


#4 posted 06-13-2016 10:41 PM

Walnutbeard, where are you located?? I don’t see a city in your profile.

View benchbuilder's profile

benchbuilder

284 posts in 2283 days


#5 posted 06-14-2016 08:05 PM

Hey walnutbeard, I might like to have the wings, you still have them?

View Rem7's profile

Rem7

1 post in 244 days


#6 posted 04-11-2017 12:41 AM

Do you have the fence still miner just broke?

View Joeythreeputts's profile

Joeythreeputts

9 posts in 221 days


#7 posted 05-04-2017 02:35 AM

Hello walnutbread in need of a front bracket for grizzly g1022 if you still have it I’ll take I’m in New York will pay for cost it’s for a right tilt saw. Thank You

View Joeythreeputts's profile

Joeythreeputts

9 posts in 221 days


#8 posted 05-04-2017 02:37 AM

Hello everyone name is Joe. I’m in need of a front bracket for a grizzly g1022 contractors table saw anyone know where to get a replacement any advice would be greatly appreciated.

View Davevand's profile

Davevand

49 posts in 669 days


#9 posted 05-04-2017 05:10 PM

Hi
I have a 1022z table saw that I am parting out.
Let me know exactly what you are looking for and a picture to compare to mine, I think they would be the same.

Dave

View Joeythreeputts's profile

Joeythreeputts

9 posts in 221 days


#10 posted 05-05-2017 02:31 AM

Thanks Davevand will do if it’s the same you will be my hero will take a picture tomorrow and send it to you Thank you

View Joeythreeputts's profile

Joeythreeputts

9 posts in 221 days


#11 posted 05-06-2017 12:19 AM

Hello Dave still haven’t taken saw apart will do tomorrow please whay ever you do don’t sell anything until I send you the picture lol. I will do my best to get you the picture

View Joeythreeputts's profile

Joeythreeputts

9 posts in 221 days


#12 posted 05-06-2017 12:20 AM

Anyone else out there that can help me out. In need of a front bracket for grizzly g1022 right tilt table saw any info would be greatly appreciated

View Joeythreeputts's profile

Joeythreeputts

9 posts in 221 days


#13 posted 05-07-2017 05:54 PM

Hello everyone here is a picture of a front bracket I am looking for for my grizzly g1022 if anyone has any information on how to get one or if anyone has some spare parts like the picture it would be so greatly appreciated. It’s for a right tilt table saw. ThankYou

View Tim's profile

Tim

3678 posts in 1794 days


#14 posted 05-07-2017 10:12 PM

Joey you posted your picture in the wrong thread somehow. You posted it here:
http://lumberjocks.com/topics/194490

View D11cat's profile

D11cat

5 posts in 210 days


#15 posted 05-14-2017 03:48 PM

Looking for a fence for the g1022 table saw the block at the back of fence is broke

showing 1 through 15 of 20 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com