LumberJocks

Anyone have ever tried this tool

  • Advertise with us

« back to Coffee Lounge forum

Forum topic by GMman posted 01-20-2010 07:40 PM 1427 views 0 times favorited 6 replies Add to Favorites Watch
View GMman's profile

GMman

3902 posts in 3157 days


01-20-2010 07:40 PM

Topic tags/keywords: question

6 replies so far

View Gene Howe's profile

Gene Howe

8236 posts in 2888 days


#1 posted 01-20-2010 07:45 PM

I have the tool, though it’s not the same manufacturer. I works well in areas difficult to sand.

-- Gene 'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton

View JAGWAH's profile

JAGWAH

929 posts in 2543 days


#2 posted 01-20-2010 08:24 PM

It’s on my must have list but not so much for sanding as cutting. Another site Breaktime Classic,(I hope this tag works}, has a post about making the blades which are expensive.

it’s a well made tool that cuts cleanly and controllably. My hope is it will replace my roto tool.

editted to say I couldn’t find the discussion unless it was here, not sure. But Breaktime Classic is a good site.

-- ~Just A Guy With A Hammer~

View JAGWAH's profile

JAGWAH

929 posts in 2543 days


#3 posted 01-20-2010 08:38 PM

My bad it was on JLC's site about the blades.
You’ll have to register to see the pics. A word of warning tho they don’t cotton well to anyone posting unless they’re in the trades.

-- ~Just A Guy With A Hammer~

View Dan Lyke's profile

Dan Lyke

1510 posts in 3584 days


#4 posted 01-20-2010 10:33 PM

I borrowed a MultiMaster from my brother in law to cut some expanded steel reinforced plastered button board.

Had to buy him new blades. Wow were they expensive (this was before the knock-offs started appearing).

My reaction to the tool is that if you need it, it’s an absolute damn the expense must-have tool. I’m going to try to make sure I never need that tool, ever again. To re-use an old simile, it’s like shoulder length latex gloves: When you need them, you really need them, but if you can avoid being a veterinarian in the first place…

-- Dan Lyke, Petaluma California, http://www.flutterby.net/User:DanLyke

View GMman's profile

GMman

3902 posts in 3157 days


#5 posted 01-20-2010 11:19 PM

Thanks for all of your info:

View albut's profile

albut

56 posts in 3151 days


#6 posted 01-21-2010 12:32 AM

hi gmman if you whant pay less king canada or canadiantire sell on

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com