Apollo vs. Fuji Sprayers

« back to Power Tools, Hardware and Accessories forum

65 posts in 2068 days

01-06-2010 11:41 PM

Topic tags/keywords: question

I recently posted about being in the market for a sprayer. No hits on the 3M accuspray yet but I was wondering if anyone could compare an Apollo 825 and a Fuji 3, or if anyone has one of these willing to give me some input. Thanks as always,
FMG

-- FMG- Woodworking is 90% mental the other half is physical

1 reply so far

adam77

home | projects | blog

39 posts in 2264 days

#1 posted 01-07-2010 02:32 AM

I have the Fuji and love it but Ive never used any other spray system so i wouldnt know any better. Theres a pretty good review of the fuji on newwoodworker.com. Plan on a lot of experimentation with ratios of thinners and retarders and diffrent temps. I learn something new everytime I use my sprayer.

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	10147
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	910
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	173
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	185
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	555
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	2906
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	4808
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	20576
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	54
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	3483
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	919
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	4283
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1057
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	1437
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	993
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	3617
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1871
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	7491

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
Issues Brand New TS R4512	Manny_E	01-30-2015 10:42 AM	by RobS888	sign in to get readership tracking
The Stumpy Nubs Workshop- Woodworking infotainment at it's best!	StumpyNubs	01-30-2015 10:42 AM	by HamS	sign in to get readership tracking
My Journey As A Scroll Saw Pattern Designer #1485: Watching Paint Dry	Sheila Landry (scrol	01-30-2015 10:38 AM	by robscastle	sign in to get readership tracking
My first pen:	Kerry Drake	01-30-2015 10:35 AM	by robscastle	sign in to get readership tracking
rolling toy thing	flatrock	01-30-2015 10:33 AM		sign in to get readership tracking
Opionions on this craftsman hybrid saw	Rivercitykenb	01-30-2015 10:26 AM	by knotscott	sign in to get readership tracking
Getting frustrated with organization (or lack thereof)	Nate L.	01-30-2015 10:23 AM	by robscastle	sign in to get readership tracking
Segmented Urn - Something different	BobWemm	01-30-2015 10:17 AM	by Bob Collins	sign in to get readership tracking
Far too long	mIps	01-30-2015 10:15 AM	by robscastle	sign in to get readership tracking
AlbertSilva's Profile	AlbertSilva	01-30-2015 10:11 AM		sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

Issues Brand New TS R4512

Manny_E

01-30-2015 10:42 AM

by RobS888

to get readership tracking

The Stumpy Nubs Workshop- Woodworking infotainment at it's best!

StumpyNubs

01-30-2015 10:42 AM

by HamS

to get readership tracking

My Journey As A Scroll Saw Pattern Designer #1485: Watching Paint Dry

Sheila Landry (scrol

01-30-2015 10:38 AM

by robscastle

to get readership tracking

My first pen:

Kerry Drake

01-30-2015 10:35 AM

by robscastle

to get readership tracking

rolling toy thing

flatrock

01-30-2015 10:33 AM

to get readership tracking

Opionions on this craftsman hybrid saw

Rivercitykenb

01-30-2015 10:26 AM

by knotscott

to get readership tracking

Getting frustrated with organization (or lack thereof)

Nate L.

01-30-2015 10:23 AM

by robscastle

to get readership tracking

Segmented Urn - Something different

BobWemm

01-30-2015 10:17 AM

by Bob Collins

to get readership tracking

Far too long

mIps

01-30-2015 10:15 AM

by robscastle

to get readership tracking

AlbertSilva's Profile

AlbertSilva

01-30-2015 10:11 AM

to get readership tracking

Apollo vs. Fuji Sprayers

1 reply so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...