LumberJocks

Turning on tablesaw

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by Brinth posted 12-03-2015 10:52 PM 631 views 1 time favorited 5 replies Add to Favorites Watch
View Brinth's profile

Brinth

68 posts in 388 days


12-03-2015 10:52 PM

Topic tags/keywords: jig trick tip tablesaw turning

A friend of me saw i was using my tablesaw for turning and asked me to show the idea.
It is very simple and realy fast. I cut the total Deep in one row.
It is just a jig there can rotate the Wood whyle cutting it on the tablesaw.
It is mounted on the sliding parts of my tablesaw.

I know it is also possible to do on a planer.

Ready to start directly from a Square piece of lumber:

Closer Photo before start:

After cutting it. I have heard that it help on the grooves if i have “round teeths” on my sawblade. I have not tryed it because it is realy fast to sand away in that jig:

After sanding and ready to make some “limbs on a pubbet” in a size you cannot by (in denmark)

-- Brinth, Denmark - "nothing is impossible and everything goes; if you have the will (and the time) to do it"


5 replies so far

View Knothead62's profile

Knothead62

2581 posts in 2426 days


#1 posted 12-04-2015 12:35 AM

I have never seen that before. Suggestion- you might consider buying a good dust collector.

View woodbutcherbynight's profile (online now)

woodbutcherbynight

2440 posts in 1873 days


#2 posted 12-04-2015 03:51 AM

Interesting idea.

-- Live to tell the stories, they sound better that way.

View MrUnix's profile (online now)

MrUnix

4229 posts in 1663 days


#3 posted 12-04-2015 04:00 AM

There are several videos and how to’s out there showing various ways to turn on the table saw… a quick google will turn up quite a few. There are also a few that are pretty wild, and not something I would want to attempt… like this one by Izzy making a bowling ball on a table saw :)

You can find his project page about it here: http://lumberjocks.com/projects/89351

Cheers,
Brad

-- Brad in FL - To be old and wise, you must first be young and stupid

View bigblockyeti's profile

bigblockyeti

3668 posts in 1185 days


#4 posted 12-04-2015 11:56 AM

I have cut cove moulding on the table saw before and considered buying one of these:

http://www.amazon.com/CMT-235-006-07-Cutter-800-523-11-Molding/dp/B000P4JP66

View Fred Hargis's profile

Fred Hargis

3942 posts in 1958 days


#5 posted 12-04-2015 12:37 PM

Very interesting. Great results as well.

-- Our village hasn't lost it's idiot, he was elected to congress.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com