LumberJocks

FS SawStop PCS blade guard New

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by Bill7255 posted 11-20-2015 05:37 PM 393 views 0 times favorited 5 replies Add to Favorites Watch
View Bill7255's profile

Bill7255

354 posts in 1752 days


11-20-2015 05:37 PM

I have a new SawStop PCS blade guard for sale. I installed my Excallibur over arm and do not need this.

$90 shipped lower US

-- Bill R


5 replies so far

View AZWoody's profile

AZWoody

700 posts in 691 days


#1 posted 11-20-2015 05:59 PM

Does the Excalibur come with a riving knife as well?
I would just disassemble what you have because the riving knife is just as important a safety feature on your saw as the braking system.

View Kazooman's profile

Kazooman

628 posts in 1420 days


#2 posted 11-20-2015 06:35 PM



Does the Excalibur come with a riving knife as well?
I would just disassemble what you have because the riving knife is just as important a safety feature on your saw as the braking system.

- AZWoody

Good point. The saw comes with a separate riving knife. No need to extract the one from the guard.

View AZWoody's profile

AZWoody

700 posts in 691 days


#3 posted 11-20-2015 06:39 PM


Does the Excalibur come with a riving knife as well?
I would just disassemble what you have because the riving knife is just as important a safety feature on your saw as the braking system.

- AZWoody

Good point. The saw comes with a separate riving knife. No need to extract the one from the guard.

- Kazooman

Ah ok, the past couple saws I bought only had one riving knife that had the guard that could be bolted to it and not an additional one.

View JeffP's profile

JeffP

573 posts in 859 days


#4 posted 11-21-2015 12:16 AM

I hope you sell yours, because in addition to being pleasantly surprised, I’ll know there is a chance I could sell mine as well. SS was kind enough to build a little niche into the side of the cabinet to hold this item when “not in use”. I carefully tucked mine in there when I was putting the saw together…hasn’t come out since.

I also have the (relatively nice) fence and rails still in their box and never unpacked (I have Incra full boat system). The fence system weighs so much I don’t figure it’s worth selling it.

-- Last week I finally got my $*i# together. Unfortunately, it was in my shop, so I will probably never find it again.

View Bill7255's profile

Bill7255

354 posts in 1752 days


#5 posted 11-21-2015 12:38 AM

Ikn


I hope you sell yours, because in addition to being pleasantly surprised, I ll know there is a chance I could sell mine as well. SS was kind enough to build a little niche into the side of the cabinet to hold this item when “not in use”. I carefully tucked mine in there when I was putting the saw together…hasn t come out since.

I also have the (relatively nice) fence and rails still in their box and never unpacked (I have Incra full boat system). The fence system weighs so much I don t figure it s worth selling it.

- JeffP

It is of interest to someone who bought a SS contractor saw and did not buy this upgrade blade guard. Shipping is expensive.

-- Bill R

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com