LumberJocks

Craigslist / Auction score update $20 Unisaw

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Ajs73 posted 11-05-2015 11:09 AM 1166 views 0 times favorited 19 replies Add to Favorites Watch
View Ajs73's profile (online now)

Ajs73

134 posts in 982 days


11-05-2015 11:09 AM

Just got in from today’s heavy machinery
auction with a Old Unisaw. Wasn’t even interested
but wasn’t gonna let it go for $15 so I bid $20 &
got it. Have know idea what I’m gonna do with it. It’s 3 phase, right tilt. I’ll post pics in comments
Hi all, just wanted to share. I picked up a Powermatic PM64
with Biesmeyer fence on CL for $150.
It’s a right tilt 1 1/2 hp but as often as
I change angles I should be fine with
that. Should be a good upgrade over
my Craftsman 113.

auction for $30. Don’t have any idea what to
make with it so any ideas are appreciated.

at my house can appreciate new tools or
“a piece of wood” as my wife says.

Thanks for any input or comments. Nobody

-- Andy, Alliance,Ohio


19 replies so far

View Ajs73's profile (online now)

Ajs73

134 posts in 982 days


#1 posted 11-05-2015 11:12 AM

Don’t know how the text got scrambled
a bit but beam is cherry 6”x6” x104” Any project ideas ?

-- Andy, Alliance,Ohio

View b2rtch's profile

b2rtch

4822 posts in 2513 days


#2 posted 11-05-2015 11:33 AM

The table saw is very nice.

-- Bert

View Smitty_Cabinetshop's profile

Smitty_Cabinetshop

13734 posts in 2083 days


#3 posted 11-05-2015 11:55 AM

Cherry 6×6? Very nice! I have no ideas, but that’s something I wouldn’t have passed on, either.

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive --

View HokieKen's profile

HokieKen

1768 posts in 603 days


#4 posted 11-05-2015 07:47 PM

Nice scores! I picked up a PM63 with the Vega fence on CL for the same price a while back. Best CL purchase I ever made.

-- Kenny, SW VA, Go Hokies!!!

View Ajs73's profile (online now)

Ajs73

134 posts in 982 days


#5 posted 11-06-2015 04:07 PM

Thanks for the replies.
Don’t know what to do with
this 6×6. I guess even if I
sell it shouldn’t be hard
to get my money back. Here’s a picture of a
few other thing I picked
up at same auction for a
whole $12

-- Andy, Alliance,Ohio

View waho6o9's profile

waho6o9

7174 posts in 2042 days


#6 posted 11-06-2015 04:10 PM

Interesting how the clamps have a cam lock, Congrats!

View Richard's profile

Richard

1898 posts in 2155 days


#7 posted 11-06-2015 05:11 PM

OK You Suck .
I have an older Rockwell saw with a Right Tilt as well and the only issue I have heard about them is if you do a 45 miter on one side of a board and then want to a do a 45 miter on the other the tip of the miter can go under the fence since it is on the bottom of the board and cause issues with the next 45 cut. I just move the fence to the other side and then the tip of the 45 miter is on top and can’t go under the fence.

View Tedstor's profile

Tedstor

1625 posts in 2098 days


#8 posted 11-06-2015 06:35 PM

Nice score. Now you can sell you 113 for $150 and break even.

View ElChe's profile

ElChe

630 posts in 801 days


#9 posted 11-06-2015 08:37 PM

You suck…

-- Tom - Measure twice cut once. Then measure again. Curse. Fudge.

View TheFridge's profile

TheFridge

5765 posts in 951 days


#10 posted 11-06-2015 08:52 PM

Ditto

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View Ajs73's profile (online now)

Ajs73

134 posts in 982 days


#11 posted 11-07-2015 09:23 PM

8” Rockwell jointer beside it went
for $35.

Scrap price is wortth the effort

-- Andy, Alliance,Ohio

View knotscott's profile

knotscott

7215 posts in 2840 days


#12 posted 11-07-2015 09:55 PM

Awesome deals!

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View SirIrb's profile

SirIrb

1239 posts in 695 days


#13 posted 11-07-2015 10:35 PM

1968 uni. Baby puke green…of course.

Owwm.org and begin the rebuild. Great score. You suck in ways that would bring out the ban-hammer if I listed them.

-- Don't blame me, I voted for no one.

View MrUnix's profile

MrUnix

4230 posts in 1664 days


#14 posted 11-07-2015 10:39 PM

1968 uni. Baby puke green…of course.

It’s a 1972 model according to the serial number page in the VM Wiki.

Cheers,
Brad

-- Brad in FL - To be old and wise, you must first be young and stupid

View Ajs73's profile (online now)

Ajs73

134 posts in 982 days


#15 posted 11-08-2015 12:44 AM

Thanks guys, it might be grey under the green.
Green seems to be a hack job. Haven’t got
to look into it to much but pictures make it look
rougher than it is. For sure need an overhaul
but everything seems to move quite well. Not
sure what to do. Haven’t got to even use my
new pm64 much. How would the 2 compare
If both were in descent shape ?

-- Andy, Alliance,Ohio

showing 1 through 15 of 19 replies

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com