LumberJocks

Jointer Knives?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Scotty Stepp posted 12-04-2009 05:23 PM 3362 views 0 times favorited 13 replies Add to Favorites Watch
View Scotty Stepp's profile

Scotty Stepp

25 posts in 2317 days


12-04-2009 05:23 PM

I need to replace my Delta JT360 jointer knives. 6 1/8 inch long.

Any suggestions?

Thanks!


13 replies so far

View UnionLabel's profile

UnionLabel

660 posts in 1955 days


#1 posted 12-04-2009 05:26 PM

http://www.holbren.com/jointer-planer-knives/
Try these guys, they are pretty good.

-- Methods are many,Principles are few.Methods change often,Principles never do.

View Kent Shepherd's profile

Kent Shepherd

2698 posts in 2041 days


#2 posted 12-04-2009 05:31 PM

Freud makes all sizes of jointer knives. I am sure they have the right size. If you know the actual size of the knives. Just measure the thickness, width and length of your old ones.

Or you can do this——http://www.toolpartsdirect.com/cgi-bin/parttools.cgi/37-658

-- She thought I hung the moon--now she just thinks I did it wrong

View Straightpiped's profile

Straightpiped

89 posts in 2246 days


#3 posted 12-04-2009 06:37 PM

That toolpartsdirect seems expensive. I have had good luck with Grizzly knives. My current set is CMT and I have been unhappy with them, JMO.

-- T. Nelson

View Kent Shepherd's profile

Kent Shepherd

2698 posts in 2041 days


#4 posted 12-04-2009 07:20 PM

Staightpiped, You may be right. I didn’t bother to check prices. I just did a quick search for that jointer, and that’s the first one I found. CMT is also good. Probably Grizzly too. I guess maybe we all made the point that there are a lot of options, they don’t need to be Delta knives.
Scotty, If you have a local dealer, you might check there first. Online is a great alternative if you don’t.

-- She thought I hung the moon--now she just thinks I did it wrong

View MedicKen's profile

MedicKen

1602 posts in 2217 days


#5 posted 12-04-2009 09:47 PM

http://www.amanatool.com/

-- My job is to give my kids things to discuss with their therapist....medic20447@gmail.com

View karday1286's profile

karday1286

5 posts in 296 days


#6 posted 04-05-2014 12:03 AM

Kent: Maybe you can help me. I inherited a JT 360 Jointer (Delta) and it is new but was a store model so no knives nor the bars that hold them in. I bought them from Delta. But the bolts that secure the bars (12 ea) were no longer available Delta said they thought they were 1/4”x28×3/8” right hand hex hear bolts. Any way you can confirm that? Grizzly has similar jointer and they use 1/4”x28×9/32”size but they call them GIB screws.

View OldWrangler's profile

OldWrangler

720 posts in 349 days


#7 posted 04-05-2014 12:42 AM

Go to eReplacementParts.com and put in your model #. They will have a part diagram and sometimes the parts too. If not try Blades.com, they have about all kinds of blades.

-- I am going to go stand outside so if anyone asks about me, tell them I'M OUTSTANDING!

View OldWrangler's profile

OldWrangler

720 posts in 349 days


#8 posted 04-05-2014 12:48 AM

I went ahead and checked with eReplacementParts.com and they do carry the jointer knives. They are on back order until May and the set of 3 is a little over $100.

-- I am going to go stand outside so if anyone asks about me, tell them I'M OUTSTANDING!

View MrUnix's profile

MrUnix

674 posts in 954 days


#9 posted 04-05-2014 12:51 AM

Those blades are listed as 6” x 5/8” x 3/32.. you should be able to use the Freud C350 knives which are 6” x 5/8” x 1/8”. Amazon has them for about $25 for a set of 3.

Cheers,
Brad

-- Brad in FL - To be old and wise, you must first be young and stupid

View karday1286's profile

karday1286

5 posts in 296 days


#10 posted 04-05-2014 12:57 AM

Thanks, I tried them and the knife screws are discontinued. Blades.com has no to do about jointers so maybe its another site??

View karday1286's profile

karday1286

5 posts in 296 days


#11 posted 04-05-2014 01:10 AM

I have the blades. I am trying to get the knife bolts which are no longer sold.

View MrUnix's profile

MrUnix

674 posts in 954 days


#12 posted 04-05-2014 01:39 AM

My post was regarding the original question karday… but for your missing bolts – ereplacements show them to be 1/4”x3/8”x28tpi right hand grade 8 bolts.. pretty easy to verify (take one that size/tpi and see if it fits), and you can probably pick 12 of them up at Ace or any other decent hardware store for a couple bucks.

Cheers,
Brad

-- Brad in FL - To be old and wise, you must first be young and stupid

View TheWoodenOyster's profile

TheWoodenOyster

1057 posts in 690 days


#13 posted 04-05-2014 11:28 AM

www.americannationalknife.com

-- The Wood Is Your Oyster

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase