LumberJocks

Delta 36-725 TS Outfeed

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by natgas posted 10-06-2015 04:55 PM 531 views 0 times favorited 3 replies Add to Favorites Watch
View natgas's profile

natgas

4 posts in 450 days


10-06-2015 04:55 PM

I have the Delta 36-725 and am interested in improving it by adding an outfeed table; what/how would I go about this? I’ve checked out several videos on the subject but I’m still confused about how to attach and exactly what to build.

Thanks

-- Randy


3 replies so far

View chaptastic's profile

chaptastic

1 post in 1324 days


#1 posted 10-06-2015 05:15 PM

I just went through the same process. Since the fence needs to ride on the rear rail I decided against trying to attach the outfeed to the saw. I don’t move the saw around very much so I ended up building a simple stand-alone outfeed and shimming the legs to match the table. The fence doesn’t need much clearance off the back rail so you can position it pretty close (1/8 inch or so).

View hotbyte's profile

hotbyte

841 posts in 2436 days


#2 posted 10-06-2015 07:18 PM

I do same as chaptastic. Mine is also my router table and assembly table in a small shop.

View natgas's profile

natgas

4 posts in 450 days


#3 posted 10-06-2015 07:20 PM

thanks to both of you; I guess that is what I’ll do; just build a simple outfeed table that will be sturdy enough to stand alone.

Thx

-- Randy

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com