Scheppach ts2010 table saw

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by stanley_clifton posted 12-01-2009 08:35 PM 2779 views 0 times favorited 3 replies Add to Favorites Watch
View stanley_clifton's profile


195 posts in 3123 days

12-01-2009 08:35 PM

Topic tags/keywords: table saw scheppach

Has anyone got experience of using this saw? If so, what do you think of it? I want to use it for box making and, despite assurances from the promo blurb and one testimonial, I’m concerned that what is basically a site saw will not be sufficiently accurate. Any advice welcome.

-- Stanley generally struggling

3 replies so far

View pommy's profile


1697 posts in 3111 days

#1 posted 12-01-2009 08:39 PM

Hi Stanley

i have only ever used one as a site saw but i must say its very good and i would gladly use one in my small workshop

-- cut it saw it scrap it SKPE: ANDREW.CARTER69

View stanley_clifton's profile


195 posts in 3123 days

#2 posted 12-02-2009 12:37 AM

Thanks or these comments. I will be putting the same message on UK workshop, but could not get on the site earlier this evening.

-- Stanley generally struggling

View shiney5757's profile


111 posts in 3191 days

#3 posted 12-03-2009 01:52 AM

i have used it for site work, it was used by at least 6 joiners in a new school build for cutting mdf sheets over several months. lets just say that it got a lot of abuse and no care. But still worked with resonable presision when we were finished. A dust extractor was used with it but extraction was poor

-- I cut it twice & it was still too short

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics