Sanding Drums design sketch help

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Alonso posted 1705 days ago 652 views 0 times favorited 1 reply Add to Favorites Watch
View Alonso's profile


946 posts in 1843 days

1705 days ago


I’ve been looking for a design of some sanding drums for a drill press. I know I have it in one of the 200+ woodworking magazines that I own, and I spent lot of time trying to find it without luck, if somebody knows of the magazine issue, please let me know I will really appreciate it.


-- The things I make may be for others, but how I make them is for me.

1 reply so far

View Mark Shymanski's profile

Mark Shymanski

5005 posts in 2318 days

#1 posted 1456 days ago

I’ve heard folks just use mdf disks rough cut on the bandsaw and then trued up on a lathe or on the DP itself. I think if I were to go that route I’d just use the bandsaw cut some circles and stack’em together on a shaft and go from there.


-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase