Best price on a Forrest blade?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Shane posted 09-23-2015 01:44 AM 1199 views 0 times favorited 15 replies Add to Favorites Watch
View Shane's profile


294 posts in 1627 days

09-23-2015 01:44 AM

I’m considering buying a general purpose Woodworker II 10 inch standard kerf blade for my table saw. Anyone know of the best place to get one price-wise?

15 replies so far

View daddywoofdawg's profile


1021 posts in 1391 days

#1 posted 09-23-2015 05:19 AM

scan the net. google, Woodworker II 10 inch standard kerf blade.

View lfparker's profile


5 posts in 792 days

#2 posted 09-23-2015 11:58 AM

Woodcraft, Amazon….

View syenefarmer's profile


470 posts in 2896 days

#3 posted 09-23-2015 11:40 PM

Think Ridge Carbide.

View Andre's profile


1452 posts in 1622 days

#4 posted 09-24-2015 12:16 AM

Check Lee Valley, only place around here that has them!

-- Lifting one end of the plank.

View TheFridge's profile


8160 posts in 1302 days

#5 posted 09-24-2015 01:22 AM

Maybe Amazon if you have prime.

They call it a general purpose but it’ll crosscut like a champ.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View Shane's profile


294 posts in 1627 days

#6 posted 09-24-2015 02:20 AM

I think after some research I’m going to go with the Freud fusion thin kerf since my saw only has 1.5hp and its half the cost

View pwk5017's profile


51 posts in 1141 days

#7 posted 09-24-2015 02:55 PM

I have purchased a few forrest blades from silvers mill or slavers mill. whatever, they are in NY. Usually sale price for WWII 40 tooth is $105ish. free shipping and no sales tax. beat that, amazon! you cant!

get the thin kerf WWII. I loved that blade on my 1.5hp contractor saw.

View pwk5017's profile


51 posts in 1141 days

#8 posted 09-24-2015 03:00 PM

it is slivers mill. $107 and free shipping for your 40tooth thin kerf blade. The rip blade is cheap cheap for $75. Im considering buying that one now… I am too lazy to switch blades though, so I rock a WWII 40 tooth blade. Only comes out for sharpening and cleaning.

View Rick  Dennington's profile

Rick Dennington

5570 posts in 3010 days

#9 posted 09-24-2015 03:06 PM

I have 4 WWII blades…..2 thin, and 2 reg. kerf…Different times…different prices…I’ve tried the rest…now I use the best….

-- My grandpa used to say: "Y'all come back when you can....come after dinner, and leave before supper.."

View OggieOglethorpe's profile


1276 posts in 1926 days

#10 posted 09-24-2015 04:41 PM

I get them locally from Coastal Tool for the same price as all of the typical discounters.

However, I never have a problem paying slightly more from my two local guys, as I like having local guys to visit.

View SirIrb's profile


1239 posts in 1046 days

#11 posted 09-24-2015 05:17 PM

WWII is one of the best available blades. Buy it.

-- Don't blame me, I voted for no one.

View knotscott's profile


7754 posts in 3191 days

#12 posted 09-24-2015 05:18 PM

I think after some research I m going to go with the Freud fusion thin kerf since my saw only has 1.5hp and its half the cost

- Shane

Not a bad move IMO. With the money saved, invest in a decent TK 24T ripper like the LU87.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View bowedcurly's profile


519 posts in 1545 days

#13 posted 09-27-2015 09:02 PM

I have the LU87 and it’s a sweet cuttin blade effortless quiet sharp.

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View jerkylips's profile


274 posts in 2386 days

#14 posted 10-01-2015 02:26 AM

I just picked this up recently. Reviews were great. I’ve only used it a bit but so far so good..

View Shane's profile


294 posts in 1627 days

#15 posted 10-01-2015 02:48 AM

I think that despite a lot of back and forth I’m going to try the Freud fusion TK. My saw only has 1.5hp so I’m drawn to the thin kerf blades and it’s half the cost. I can use the extra cash to get some other things I need around the shop.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics