Ryobi Router Table Upgrade

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Fish22 posted 11-22-2009 04:44 AM 1627 views 0 times favorited 1 reply Add to Favorites Watch
View Fish22's profile


83 posts in 3112 days

11-22-2009 04:44 AM

I have a Ryobi router table that I got on clearance from HD for $15. I am not real thrilled about the fence that comes with the unit, Has anyone upgraded the fence but continued to use the rest of the table? I have looked online and most of the fences I have seen are 32 or 36 inches long, this table measures 28 inches long and 14 inches wide. If I purchased a different fence, and it hung over the end of the table 2 inches on each side would that create other issues. I may take the table and put into a spare cabinet that I have and will modify if needed.

-- Bryan, South River, NJ

1 reply so far

View BlankMan's profile


1490 posts in 3352 days

#1 posted 11-22-2009 06:53 AM

It wouldn’t hurt to have the fence overhang the table. You could always cut the overhang off. Check out Rockler, they used to have some reasonably priced fences and they currently have $15 off on $50 or more purchases.

Or you could build your own that meets your needs exactly.

-- -Curt, Milwaukee, WI

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics