Posting on behalf of Jeano - a new member

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Bureaucrat posted 11-20-2009 04:33 AM 2307 views 0 times favorited 4 replies Add to Favorites Watch
View Bureaucrat's profile


18337 posts in 3071 days

11-20-2009 04:33 AM

Topic tags/keywords: tablesaw question

I have a wallace universal table saw made by J.D Wallace co. I would say made sometime in the 1940s. I have been using it a lot lately . I is a gear driven saw that uses a timming belt to turn the gears. I was using it yesterday and the belt broke and i have not been able to find one. I found the saw on the web but nothing about any parts. The belt that was on it is made by powergrip pat#2507852 the # on the belt is 9167by 1 an half i think this 1an a half is the width and is 14” around the belt I have looked up powergrip belts and have found nothing. This is a real good saw cuts truer than any thing that i have ever used. It has a 8” blade with i thank with a two horse motor which turns it pertty fast. It is on a cast iron frame that is real heavy with no viberation what so ever. I really love this saw and would really hate to scrap it just for a belt. if any one could help me find a belt I would greatly apperceate it.

thanks jeano

-- Gary D. Stoughton, WI

4 replies so far

View GMman's profile


3902 posts in 3116 days

#1 posted 11-20-2009 04:45 AM

We have a place here that has any belt you want, any way you can measure how long and wide also is it a v belt?
Would have to be exact measures.

View russv's profile


262 posts in 2588 days

#2 posted 11-20-2009 04:46 AM

There is a company in milwaukee called dekert. They make all kinds of belts for the company I work for. we make converyors and we use them to make belts for our power conveyors. I’ll get the number at work tomorrow and post it here on this forum. they might be able to help.

close up pics of the belt and/or gears might help


-- where to go because you don't want no stinking plastic!

View MarkwithaK's profile


370 posts in 2597 days

#3 posted 11-20-2009 06:10 AM

They are made by the Gates Corporation.

Grainger should be able to match something up though.

-- If at first you don't succeed then maybe skydiving isn't for you.

View jeano's profile


2 posts in 2529 days

#4 posted 11-22-2009 02:18 AM

The belt is not a v belt it is a grooved belt like a timing belt . It is 14” around the belt and is 1 1/2” wide. it is a very short belt.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics