woodworking tool garage sale Millers MD November 21 2009

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by marc_rosen posted 11-18-2009 05:05 AM 2001 views 0 times favorited 2 replies Add to Favorites Watch
View marc_rosen's profile


141 posts in 3203 days

11-18-2009 05:05 AM

Hey All,
I am holding a garage sale this Saturday in Millers Maryland (about 30 miles north of Baltimore -Go RAVENS!) from 9AM until 3 PM Address is 4109 Church Road Millers MD 21102.
Cash only please, no shipping. Below is a pasted list of some of the items. Hope some of you can make it.
Most equipmnet is in great condition. I will try to respond to all emails. Marc

Garage Woodworking tool sale Saturday November 21 2009 9AM until 3PM Rain or Shine Cash only, no shipping.

Address is 4109 Church Road Millers MD 21102

Contact info by email only
Home = Work =

1949 Delta 6×48 belt sander Great Cond. All original parts $375 (SN 80-5130)

1952 Delta 6×48 belt sander Fair Cond (shortened stand, some unoriginal knobs, Dayton motor) $175 (SN 104-4391)

1974 6×48 belt sander Very Good , Dayton motor $375 (SN GI 9588)

1987 6×48 belt sander Frame and lower pulley/ wheel assembly on closed stand, no motor. Shaft spins freely pulley and wheel good, but otherwise it’s a junker. $50 (SN 87C-04392) (will sell with ’52 sander for $200)

1955 Rockwell Delta 1460(SN 115-5414) lathe fitted with new 3 inch solid tables (originals also available) and a 1.5hp Dayton variable speed DC motor (230VAC feed)
Also included 2 banjos (is that what you call them?), 2 tool rests (one double) several faceplates and a 4 jaw Tekna -Tools chuck, link belt. Great condition $1050

1963 Unisaw (SN DA 2114) missing plinth, handwheels, splitter, other parts. What is left is cabinet, all trunions and mechanical parts, table and two wings (great cond, just surface rust. Jetlock fence and rails, 3 phase motor, pulley (runs, but no way to test it)
$??? Make offer

1948 Rockwell Bandsaw (SN 60-8549) Fair condition but with a lot of new stuff (Urethane tires, link belt, newer table with new trunions, Iturra Spinner and tension spring, Carter stabilizer, original steel belt guard, ½ hp Delta motor 115 volt only, ca.1993) $350 (I know this may seem too much but I’m not too thrilled about selling this at this time yet I could use the money to buy other toys, er, I mean tools)

Mobile base for Unisaw with extension table $90
Duofast stapler HFN 880D $50
Duofast KN 1849 $35
Passlode Magnum 94800 $25
Rockwell Power feeder with base $50
Dewalt 3&1/4 power planer DW680K (Italian made) $90 Great cond
Dewalt Jigsaw DW321 $85 Great cond.
Porter Cable Brad nailer BN125A never used $38
Porter Cable Finish Nailer FN250B never used $80
Porter Cable 7529 2hp router with edge guide great cond $80
Craftsman Router table with stand, mobile base, feather boards, etc Great cond. $75

Lots of other stuff including circular saws, a few more pneumatic tools, electric sanders, Wilton vices (older ones), Chain saw, levels

-- Windsurfing, Woodworking, Weaving, and Woodducks. "Most woodworkers are usually boring holes"

2 replies so far

View Mark Shymanski's profile

Mark Shymanski

5621 posts in 3735 days

#1 posted 07-30-2010 08:25 AM

I hope you had a great turnout. Did you sell all these tools?

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

View marc_rosen's profile


141 posts in 3203 days

#2 posted 07-30-2010 01:19 PM

Hey Mark,
Thanks for the message. Wow, that’s an old ad. Sold the sanders and other stuff quickly but the Unis (had a 93 also that was not listed) did not go until June (Craig’s list ad). Still have the lathe and bandsaw and they are getting used regularly until they sell. How’s the weather up North? Marc

-- Windsurfing, Woodworking, Weaving, and Woodducks. "Most woodworkers are usually boring holes"

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics