Delta Table Saw Blade Insert

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Mark731 posted 09-06-2015 10:37 PM 608 views 0 times favorited 2 replies Add to Favorites Watch
View Mark731's profile


3 posts in 1091 days

09-06-2015 10:37 PM

Topic tags/keywords: table saw

I purchased a delta 36-725 10” table saw recently. The insert that came with the saw does not lay flush with the rest of the surface of the table saw. This creates issues when cutting wood. I do not see any adjusting screws to work with to make it flush. Has anybody out there seen this or have some advice ?

2 replies so far

View Rayne's profile


869 posts in 1539 days

#1 posted 09-06-2015 10:56 PM

There are screws in the insert recess that you adjust to make it flush.

View WhyMe's profile


1014 posts in 1560 days

#2 posted 09-06-2015 11:24 PM

There are small holes (5) in the insert that you can stick a small phillip screw driver in to adjust the screws in the recess of the cast iron top. If you have no screws then they are missing.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics