LumberJocks

Mounting the Rails on a PM 66

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Duffman posted 08-24-2015 11:00 PM 632 views 0 times favorited 8 replies Add to Favorites Watch
View Duffman's profile

Duffman

66 posts in 1166 days


08-24-2015 11:00 PM

Hey Guys,
I need some info. I purchased a PM66 and a set of rails, but there were no bolts to mount the rails to the saw. What size bolts do I need?

-- I'm not addicted to buying tools or wood... I can stop any time I want!


8 replies so far

View TheFridge's profile

TheFridge

8323 posts in 1324 days


#1 posted 08-24-2015 11:19 PM

Prob 1/4-20 countersinking Philips head. Or something like that.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View upinflames's profile

upinflames

217 posts in 2000 days


#2 posted 08-24-2015 11:45 PM

It depends on which fence rails, if they are round it takes a shoulder bolt and spacer, beis type takes standard hex bolts.

The round rail will use these, (minus the nut, this is for unisaw)

View Duffman's profile

Duffman

66 posts in 1166 days


#3 posted 08-25-2015 01:16 AM

i have the bies rails, with counter sunk holes

-- I'm not addicted to buying tools or wood... I can stop any time I want!

View upinflames's profile

upinflames

217 posts in 2000 days


#4 posted 08-25-2015 02:24 AM

Then it will be a tapered machine screw that fridge referenced.

View MrUnix's profile

MrUnix

6006 posts in 2037 days


#5 posted 08-25-2015 02:41 AM

The factory holes in the table are the same as on the Delta I believe, which are 3/8”-24. For mounting a Biesemeyer, those usually aren’t used and instead you need to drill 1/4 holes in the table to match the mounting holes on the rail, then use 1 inch long 1/4” flat head machine screws and nuts to secure to the table.

Biesemeyer Installation Instructions

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View Duffman's profile

Duffman

66 posts in 1166 days


#6 posted 08-25-2015 03:17 AM

Awesome, thanks for the link Brad

-Ryan

-- I'm not addicted to buying tools or wood... I can stop any time I want!

View MrUnix's profile

MrUnix

6006 posts in 2037 days


#7 posted 08-25-2015 03:29 AM

Just realized… the manual above is for the older commercial fence/rail system, not the home shop version (which has smaller rails). Linked here just in case that is what you have instead:

Biesemeyer Home Shop Instruction Manual

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View Duffman's profile

Duffman

66 posts in 1166 days


#8 posted 08-25-2015 03:47 AM

it would appear that my rails are for the commercial fence, not the home shop version, but thanks

-- I'm not addicted to buying tools or wood... I can stop any time I want!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com