Want to build a fence for my bandsaw

« back to Woodworking Skill Share forum

Forum topic by DuaneEDMD

posted 22 days ago

186 views

0 times favorited

2 replies

DuaneEDMD home | projects | blog 68 posts in 250 days 22 days ago	I want to build a simple bandsaw fence for my 14”delta bandsaw. Not a resaw fence, just a ripping fence. Anyone got any good photos/plans out there or any good links??? Thanks. -- --It's not how long you live, but how you live that makes it a life.--
Julian home | projects | blog 695 posts in 423 days 22 days ago	Just search bandsaw fence up top. Sure most of the choices will show a resaw fence, but you can just lower the side and you’ll have a rip fence. -- Julian, Park Forest, IL
PrairieFire home | projects | blog 70 posts in 98 days 22 days ago	Hey Duane, Mine is pretty basic, but it works. I used two pieces of 5/8” plywood scrap 6” wide and 24” long. Glued them at right angles and added braces at the back to keep it at 90 degrees. I use a set square to keep it at the distance I want from the blade and to keep it square to the bade and the table. -- I am governed by an attitude of curiosity.
You must be signed in to reply.

• 
•