LumberJocks

How to join two plywood corners - Has anyone seen a product like this picture

  • Advertise with us

« back to Joinery forum

Forum topic by Jerry posted 08-20-2015 10:06 PM 2104 views 1 time favorited 9 replies Add to Favorites Watch
View Jerry's profile

Jerry

2262 posts in 1367 days


08-20-2015 10:06 PM

Topic tags/keywords: question

I’m getting ready to replace all four plywood sides of my utility trailer, and I want to improve the way the corners are handled. I envisioned a type of corner channel like my sketchup model below, that would allow me to slide the edges of the plywood where they meet to make a corner into this channel. I made this channel up, hoping that there is actually a commercial product out there that is something like it. I have searched online, but don’t even know what search term to use. If anyone has seen anything like this, please let me know. Thanks!

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/


9 replies so far

View AandCstyle's profile

AandCstyle

2799 posts in 1976 days


#1 posted 08-20-2015 10:27 PM

Hey, Jerry, I’ve never seen anything like that, but you could weld some steel U channel together so the open ends of the U are at 90 degrees to each other. Then get it powder coated so it won’t rust. HTH

-- Art

View BobAnderton's profile

BobAnderton

238 posts in 2510 days


#2 posted 08-20-2015 10:33 PM

Hey Jerry, check this out, and similar.

This# one in particular

I got there by typing “aluminum extrusion plywood corner” into google

Here’s a bunch more

If it were me I’d do like Art says and weld two steel U channels in this shape.

-- Bob Anderton - Austin, TX - Nova 3000 lathe, Alaskan Mark III mill, Husqavarna Saw

View johnstoneb's profile

johnstoneb

2518 posts in 1892 days


#3 posted 08-20-2015 10:33 PM

Do a search for corner channel.

-- Bruce, Boise, ID

View Jerry's profile

Jerry

2262 posts in 1367 days


#4 posted 08-20-2015 10:36 PM



Hey Jerry, check this out, and similar.

- BobAnderton

Perfect Bob, thanks a bunch, that looks like it will do the trick!

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View Jerry's profile

Jerry

2262 posts in 1367 days


#5 posted 08-20-2015 10:36 PM


Do a search for corner channel.

- johnstoneb

Correction, I did a search on Home Depot’s website for corner channel and got nothing. I did get a lot of good results using that search term on Google. Thanks John.

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View naugled's profile

naugled

21 posts in 2572 days


#6 posted 08-21-2015 07:22 PM

I’ve seen aluminum extrusions like that used to hold the platforms of waterbeds together at the corners, the sides were plywood.

View MrRon's profile

MrRon

4217 posts in 2963 days


#7 posted 08-21-2015 09:29 PM

http://www.8020.net/Catalog-Intro.asp This place has all kinds of corner extrusions.

View rustfever's profile

rustfever

734 posts in 3029 days


#8 posted 08-22-2015 02:29 AM

There are several products available for 1/4” panels. Look for extrusions for ‘Marlite’ shower panels/

-- Rustfever, Central California

View AlaskaGuy's profile (online now)

AlaskaGuy

3047 posts in 2028 days


#9 posted 08-22-2015 06:48 AM

Why not just bolt some angle iron to the plywood corners?

-- Alaskan's for Global warming!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com