Table saw motor - how to mount

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Keegs22 posted 08-18-2015 10:00 PM 1877 views 0 times favorited 7 replies Add to Favorites Watch
View Keegs22's profile


2 posts in 1035 days

08-18-2015 10:00 PM

I bought this Grizzly TSC-10 table saw used. I haven’t been able to find info on how to mount the motor and haven’t been able to figure it out. I’m confused on how that bracket attaches to the motor and wondering if there could be a piece missing?

Thank you

7 replies so far

View Kazooman's profile


1024 posts in 1976 days

#1 posted 08-18-2015 10:08 PM

First post – first response.

I Googled Grizzly TSC-10 manual and got a link to the entire document.

Is your saw different than the ones described in that manual?

View Keegs22's profile


2 posts in 1035 days

#2 posted 08-19-2015 12:00 AM

Thanks for the response. It is different than the ones in that manual.

View MrUnix's profile


6764 posts in 2222 days

#3 posted 08-19-2015 12:02 AM

How do you get it to hang from the ceiling like that?

-- Brad in FL - In Dog I trust... everything else is questionable

View knotscott's profile


8055 posts in 3399 days

#4 posted 08-19-2015 12:15 AM

It’s likely an older Taiwanese saw made in the Mao Shan plant. It was offered in many configurations under many different brands….Jet, Grizzly, PM, Ohio Forge, Omega, AFF, Bridgewood, Woodtek, Allied, Mao Shan and many others. The motor mount system should be pretty much the same, regardless of the leg stand, fence, or wing configuration.

The contraption mounted to the top of the motor doesn’t look like it belongs there….someone added that.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View 01ntrain's profile


255 posts in 1093 days

#5 posted 08-19-2015 02:48 AM

That contraption on top of the motor looks like some sort of tensioner…..

View JoshNZ's profile


105 posts in 1093 days

#6 posted 08-19-2015 03:28 AM

Surely the tension would come from sliding the whole bracket further out on those studs then doing up the grub screws… Does it hold sturdy enough if you remove the black piece (+ 2 bolts). Doesn’t look like it belongs there

View JoeinGa's profile


7736 posts in 2030 days

#7 posted 08-19-2015 01:34 PM

I agree. That black piece looks like someone tried to make a plate to push down on the motor, creating more tension.

Oh and that belt looks like it has turned backwards. Those “nubs” are usually on the inside

-- Perform A Random Act Of Kindness Today ... Pay It Forward

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics