Reattach stainless steel

  • Advertise with us

« back to Coffee Lounge forum

Forum topic by SkipV posted 08-13-2015 12:49 AM 631 views 0 times favorited 3 replies Add to Favorites Watch
View SkipV's profile


7 posts in 1625 days

08-13-2015 12:49 AM

Not wood related but I figure someone here will know the answer. I’ve got a stainless steel tea pot that had a plate attached to the bottom (also stainless) when it was made. The manufacturer calls it a “capsule bottom.” Anyway, the pot was allowed to boil dry and the bond between the plate and pot broke. The parts are intact and not deformed in any way but I cannot find a way to reattach the plate to the bottom of the pot. It looks like some type of adhesive was used when it was made. I can’t find anything, at least nothing reasonably priced and available in a very small quantity, that can withstand the heat of a stove.


3 replies so far

View Daruc's profile


459 posts in 555 days

#1 posted 08-13-2015 12:58 AM

There could be other, and maybe better, products but this is one that may work for you.

-- -

View crank49's profile


3979 posts in 2394 days

#2 posted 08-13-2015 02:22 AM

Clear silicone sealant can withstand over 600 degrees and would hold the bottom on pretty well.
Or, I would agree with the JB Weld also.
Either product would work as long as the pot does not boil dry.

-- Michael: Hillary has a long list of accomplishments, though most DAs would refer to them as felonies.

View SkipV's profile


7 posts in 1625 days

#3 posted 09-04-2015 12:47 AM

Due to unavoidable non-woodworking issues I haven’t been able to get back to this until now.
Thanks everyone for the replies. I tried the JB Weld and it is working so far.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics