LumberJocks

Grizzly and jet table saw,

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by FancyShoes posted 08-05-2015 03:52 PM 1292 views 0 times favorited 9 replies Add to Favorites Watch
View FancyShoes's profile

FancyShoes

506 posts in 824 days


08-05-2015 03:52 PM

I am selling my grandmothers brother’s tablesaws for him.

Blue Jet table saw, 54” fence, with guide(not pictured). Single phase, 2hp motor, he rarely used this one, he mainly used the grizzly. This is a left tilt, and has all the covers. Very nice saw. $700

Green grizzly table saw, right tilt, missing panels, single phase 3hp, has a fence, this is a very good saw, he really liked using this one. $450



9 replies so far

View rwe2156's profile

rwe2156

2190 posts in 941 days


#1 posted 08-05-2015 11:30 PM

Jet = too much. Jet blues are old machines.
Where is the fence?

Grizzly = close.

-- Everything is a prototype thats why its one of a kind!!

View FancyShoes's profile

FancyShoes

506 posts in 824 days


#2 posted 08-05-2015 11:45 PM

I actually was thinking it was too much, im going to shoot for 550 on the jet, and $400 on the grizzly.

View FancyShoes's profile

FancyShoes

506 posts in 824 days


#3 posted 08-05-2015 11:47 PM

Here is pics of the fence. I just couldnt work it out, my garage is packed full.

View knotscott's profile

knotscott

7208 posts in 2836 days


#4 posted 08-06-2015 12:48 AM

What’s that Powermatic Accufence go to?

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View FancyShoes's profile

FancyShoes

506 posts in 824 days


#5 posted 08-06-2015 01:15 AM

It goes to a future machine, picked it up at a auction to make sure i had a spare.

View knotscott's profile

knotscott

7208 posts in 2836 days


#6 posted 08-06-2015 09:31 AM

From what I can tell, the Griz is an early G1023. I suspect the Jet is one of their early hybrids with the table mounted trunnions. Have you considered swapping the fences and putting the Jet fence on the Griz? That’d make for a rreally solid saw with a good fence.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View FancyShoes's profile

FancyShoes

506 posts in 824 days


#7 posted 08-17-2015 05:56 PM

Bump for low balls! :) i told my great uncle that he may have to settle for less!

Found a 3 hp jet motor on ohio craigslist if anyone there is willing to pic both up.

View Clarkie's profile

Clarkie

380 posts in 1301 days


#8 posted 09-05-2015 01:58 AM

Wouldn’t touch either one, wait for a good old American Unisaw to come along, they can be had for the same price.

View FancyShoes's profile

FancyShoes

506 posts in 824 days


#9 posted 09-05-2015 03:33 AM

Thanks for bumping this, It reminded me to mention i just sold the grizzly. It cleaned up awesome! I replaced the bearings and belts. Cleaned all the rust out. Was pretty fun.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com