LumberJocks

Need parts to mount some grinding stones

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Rev. Jim Paulson posted 10-23-2009 08:20 PM 953 views 0 times favorited 2 replies Add to Favorites Watch
View Rev. Jim Paulson's profile

Rev. Jim Paulson

119 posts in 2743 days


10-23-2009 08:20 PM

Topic tags/keywords: grinding grinders hand made tools question modern traditional

I have some 1/4” wide by 8”diameter grindng stones that I would like to use to make some spoon bits. I have the 01 drill rod and I was planning to grind out the spoon part. The grinding stones have a 1 1/4” diameter hole in them and I need a mounting flange so they can go on a 1/2” diameter drive shaft. Any ideas where I could find such parts so I can safely use them?

Thanks,
Jim

-- www.blackswampwindsors.com


2 replies so far

View John Ormsby's profile

John Ormsby

1283 posts in 3204 days


#1 posted 10-23-2009 08:45 PM

Hello Jim,

Here is a link where you can find any size reducer bushing for your grinding wheels. Scroll down on the page to find the bushing that you need.

http://www.supergrit.com/products/products_metalworking-fiberpolishingdeburringwheels.asp

Good luck, John

-- Oldworld, Fair Oaks, Ca

View Rev. Jim Paulson's profile

Rev. Jim Paulson

119 posts in 2743 days


#2 posted 10-23-2009 08:58 PM

Hey John,
Really appreciate that information. Do you think I would require one or two of those reducer bushings per wheel?

Thanks,
Jim

-- www.blackswampwindsors.com

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com