• Advertise with us

« back to Finishing forum

Forum topic by JUC posted 07-26-2015 12:56 AM 1246 views 0 times favorited 4 replies Add to Favorites Watch
View JUC's profile


116 posts in 1884 days

07-26-2015 12:56 AM

NEED HELP. I am going to fill some cracks on a new dinning room table with epoxy and colored with transtint. Is there any problem with ORIGINAL WATERLOX adhering to the epoxy/ transtint mix?

-- If no one will ever see it, all the more reason to make it right

4 replies so far

View Woodendeavor's profile


276 posts in 2600 days

#1 posted 07-26-2015 12:10 PM

I have used Waterlox over dyed west system epoxy with no problems. I always make sure my coats are thin and I gave it 24 hours between coats.

Here is an example:

View bonesbr549's profile


1544 posts in 3060 days

#2 posted 07-26-2015 02:54 PM

I use CA glue and put Waterlox over it all the time so, I’d say it’s fine. However my motto is “test it on scrap first”.

It takes a little time and is better than saying the “OOPS”, well thats what I think, but what I say, I can’t write here.

Get a scrap board make a divot fill it, and then put a couple coats of waterlox on it and watch if for a week, you will know.

My gut says it will be fine.

Lover waterlox on cherry. Good luck and cheers.

-- Sooner or later Liberals run out of other people's money.

View JUC's profile


116 posts in 1884 days

#3 posted 07-26-2015 03:00 PM

thanks for the information and thoughts

-- If no one will ever see it, all the more reason to make it right

View RogerM's profile


792 posts in 2392 days

#4 posted 07-26-2015 06:07 PM

No! No problem!

-- Roger M, Aiken, SC

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics