My Almost Finshed Work Bench

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by AdamThorpe posted 10-19-2009 02:15 AM 1016 views 0 times favorited 2 replies Add to Favorites Watch
View AdamThorpe's profile


13 posts in 3193 days

10-19-2009 02:15 AM

Hey everyone
well i stared this project at the end of August it is still not quit done but I just couldn’t wait to share it. The finishing touches are to scrape the entire thing I think iam going to put the$9.99 out there and try out that bronco scraper. Also to finish my truing tail vice. Well this job was made out of a lot of different things such as old stair runners oak 1.5×1.5 off cuts from a friend old pews that were in his basement for years and as well as a 3’ 4’-21/4 maple slab from an old school workshop. The drawer cabints are made up from mdf and 3/4 plywood as well as the drawers them self with some oak plywood as fronts. 3’‘3’’ oak legs mortised and tenon together.there are about 3 sheets of construction grade plywood 1 sheets or mdf 2 sheets of 1/4 mdf for the drawer bottoms and a hell of alot of oak and maple needless to say it ways about 1000 pounds with all the tools my and by buddy could not move it.

Let me know what you think . Iam olny 18 and I plain on working on this bench foe a while
Thanks Adam Thorpe Pickering Could someone tell me how to post a pic go out to my home and look at workshop tab

2 replies so far

View ChunkyC's profile


856 posts in 3156 days

#1 posted 10-19-2009 03:15 AM

click the button and follow the prompts.

-- Chunk's Workshop pictures:

View a1Jim's profile


116900 posts in 3479 days

#2 posted 10-19-2009 03:18 AM


-- Custom furniture

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics