Round wood ball

« back to Woodworking Skill Share forum

Forum topic by skywalker01

posted 43 days ago

281 views

0 times favorited

4 replies

skywalker01 home | projects | blog 92 posts in 194 days 43 days ago	Topic tags/keywords: ball I need to make a ball out of hardwood. In fact I need to make two symetrical ones. I have lots of tools including a rigid side sander. I am making vise handle ends. Need to be about 1.5” in diameter. Any suggestions? I forgot to mention I don’t have a lathe. -- LAS
scrappy home | projects | blog 1681 posts in 331 days 43 days ago	If you don’t get any ideas you can work with, drop me a PM. We will work something out. Scrappy -- Scrap Wood's the best...the projects are smaller, and so is the mess!
skywalker01 home | projects | blog 92 posts in 194 days 43 days ago	I will thanks! -- LAS
a1Jim home | projects | blog 17211 posts in 477 days 43 days ago	If you have turning tools you could chuck it up in you drill press or make a jig for your router I think I saw one on Ljs Here’s a interesting approach http://www.livevideo.com/video/teanatl/A4E14D801CE3414E99B8E8D4CB488C2E/making-a-wooden-ball-without-a-lathe.aspx -- Jim from Heirloom Woodshop, custom furniture ,maker, woodworking school, heirloomwoodshop.com
lcurrent home | projects | blog 38 posts in 715 days 42 days ago	http://www.hobbylobby.com/stores/store_tour.cfm?dept=2 Hobby Lobby Carries them -- lcurrent ( It's not a mistake till you run out of wood )
You must be signed in to reply.

• 
•