Biesemeyer style fences / extending rip capacity

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by ajthomas5009 posted 07-18-2015 06:18 PM 914 views 0 times favorited 3 replies Add to Favorites Watch
View ajthomas5009's profile


296 posts in 1818 days

07-18-2015 06:18 PM

Topic tags/keywords: tip question tablesaw

The cabinet saw I recently acquired came with a biesemeyer clone. Operation and adjustments are simple, my question is about possibly moving the rails and tubes to the right to increase right of the blade capacity. From the factory it’s 30” to the right and 12” to the left. The angle iron rail is 46” and the square tube is 64”.

Since it is a left tilt saw I really don’t need a fence left of the blade. So I’m hoping someone has a quick and easy answer to how far I can move everything to the right with out effecting fence operation.

-- Sometimes you're flush and sometimes you're bust, and when you're up, it's never as good as it seems, and when you're down, you never think you'll be up again, but life goes on.

3 replies so far

View Andre's profile


2217 posts in 2007 days

#1 posted 07-18-2015 06:46 PM

Not sure, depends on the Saw, My Made in the U.S.A. Delta is totally adjustable. only screws up the measuring tapes.
Just loosen the bolts on the back and put rails wherever you want them!

-- Lifting one end of the plank.

View alittleoff's profile


541 posts in 1478 days

#2 posted 07-18-2015 06:52 PM

I thought on a left tilt saw the fence should be on the right. If it’s not you should be able to move it without any problems. The tape can be replaced to match the set up.

View MT_Stringer's profile


3183 posts in 3432 days

#3 posted 07-18-2015 08:16 PM

Here you go.

-- Handcrafted by Mike Henderson - Channelview, Texas

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics