Moving Delta 28-243 Bandsaw

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by hoss1947 posted 07-16-2015 05:26 PM 512 views 0 times favorited 3 replies Add to Favorites Watch
View hoss1947's profile


7 posts in 1347 days

07-16-2015 05:26 PM

Topic tags/keywords: delta 28-243 bandsaw moving bandsaw table removal bandsaw

Want suggestions. Also exactly how to remove the table so it is not used for lifting.

3 replies so far

View BJODay's profile


512 posts in 1360 days

#1 posted 07-17-2015 08:59 PM

Remove the table, I think it is held on with 2 bolts from underneath. Unbolt the saw assembly from the stand. Unbolt the motor from the stand if it is still too unwieldy. Have a friend help.


View Fred Hargis's profile

Fred Hargis

3837 posts in 1910 days

#2 posted 07-17-2015 09:30 PM

I have the 28-245 (same thing), and when I looked at it I think BJ is correct….remove the trunnion bolts, and the table should lift right off. If that’s not the case, the table is only held to the trunnion saddles with 3 bolts on each one.

-- Our village hasn't lost it's idiot, he was elected to congress.

View MrUnix's profile


4020 posts in 1616 days

#3 posted 07-17-2015 10:05 PM

Don’t mess with the trunnion bolts… just remove the tilt adjustment handwheels and the table pops right off.


-- Brad in FL - To be old and wise, you must first be young and stupid

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics