Oneida 1.5 HP Cyclone For Sale w/ New Leeson Motor - *SOLD!*

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by BlankMan posted 10-10-2009 09:29 PM 3798 views 0 times favorited 2 replies Add to Favorites Watch
View BlankMan's profile


1490 posts in 3354 days

10-10-2009 09:29 PM

This is an Oneida Cyclone I’ve had sitting around for a while.

There are paint scuffs on the painted white sections, that is the way it arrived from Oneida. It has been sitting in my garage for a long time in the boxes, I finally decided I need the room in my garage.

That being said, I have all the original boxes and packing material as it arrived from Oneida so I can box it up and ship it. It arrived via UPS so it is UPS shippable. It would ship in two separate boxes, one approximately 58lbs the other 64lbs. The motor/impeller housing is double boxed.

If interested contact me with your address and I can provide shipping costs via UPS or FedEx which ever turns out to be least expensive.

I’m selling it because I have two and I only need one.

New Leeson 1.5 HP TEFC Motor
Service Factor 1.15
110/220 Volts 17.2/8.6 Amps
1100 CFM – 700 CFM at 8” Static Pressure
High Efficiency Spun-Bonded Filter
Captures 99.99% of Material at 20 Micron
Captures 99% at 1 Micron
Height w/35 Gallon Drum 7’2”
Height w/55 Gallon Drum 8’2”
Footprint 24” x 24”
6” Diameter Inlet 4” x 10” Outlet
Neutral vane inlet design
Inlet & Outlet positions are independent from each other and can be rotated to any position
Separation Barrel, Cone, Impeller & Motor are new, never used
Blower housing & filter are used
Collection Barrel & Wall Brackets Not Included
The original Owners Manual is included
2000 American Woodworker Editors Choice
2001 American Woodworker Editors Choice
$550 Takes All

Oneida Cyclone

Oneida Cyclone

Onedia Cyclone

Onedia Cyclone

Onedia Cyclone

-- -Curt, Milwaukee, WI

2 replies so far

View a1Jim's profile


117095 posts in 3578 days

#1 posted 10-19-2009 06:43 AM

Some one earlier was asking about what wood be a good collector for around $500 this would be good for him I’ll see if i can find his post.

-- wood crafting & woodworking classes

View BlankMan's profile


1490 posts in 3354 days

#2 posted 10-19-2009 03:46 PM

Jim, thank you for your effort but It’s been sold and shipped last week. I wasn’t able to to delete the post so I had added sold to the title..

-- -Curt, Milwaukee, WI

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics