Rockwell jointer guard return spring missing

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by RMI66 posted 07-05-2015 04:13 PM 946 views 0 times favorited 2 replies Add to Favorites Watch
View RMI66's profile


3 posts in 1049 days

07-05-2015 04:13 PM

Topic tags/keywords: rockwell jointer guard spring spring supplier

I just picked up a Rockwell jointer Model 6 (P/N 37-608) and it’s missing the return spring for the blade guard. It’s a torsion spring and I can’t seem to locate a source for this. The Rockwell P/N for the spring is 418-09-122-0001. Any ideas on where I might find one? Thanks.

2 replies so far

View MrUnix's profile


6695 posts in 2192 days

#1 posted 07-05-2015 05:28 PM

If all you are missing is the spring, consider yourself lucky, as usually it’s the whole guard assembly that is missing! Check your local hardware store… My local Ace has a pretty good selection of springs and you can usually find one that is close enough to make work with a little creativity. Alternatively, they are pretty easy to make yourself (~19ga stainless steel wire should be sufficient).


PS: Stainless MiG welding wire works pretty good as well.

-- Brad in FL - In Dog I trust... everything else is questionable

View RMI66's profile


3 posts in 1049 days

#2 posted 07-16-2015 01:55 AM

Mr. Unix, thanks for the comment. I tried to wind my own spring from music wire and it worked perfectly!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics