LumberJocks

curiosity

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by swdst posted 06-01-2015 09:00 AM 761 views 0 times favorited 11 replies Add to Favorites Watch
View swdst's profile

swdst

44 posts in 556 days


06-01-2015 09:00 AM

Topic tags/keywords: question tablesaw

Hi all I’ve used this site for quite some time as a review guide for my purchases (thanks for some great advice, even if you didn’t know you were giving it), and decided it was time to knock on the door and ask for my acceptance. That having been said, i need some opinions (here comes the firing squad) I recently purchased a grizzly g1022pro with the incra fence and incra nitre 1000se, a shop fox mobile base, shop fox roller out feed, and a new freud diablo dado stack for $650. My question is this, did i pay too much? My plan is to keep the accessories and fence, and clean up the saw and resell it, along with my older craftsman ts, radial arm saw, scroll saw, and 4 in joiner, the money for that will go towards a new grizzly hybrid ts.


11 replies so far

View Sandra's profile

Sandra

6984 posts in 1540 days


#1 posted 06-01-2015 09:38 AM

It sounds like a good deal, but frankly I don’t know.

But I wanted to say welcome to Lumberjocks. It’s a great place to learn and share ideas.

-- No, I don't want to buy the pink hammer.

View swdst's profile

swdst

44 posts in 556 days


#2 posted 06-01-2015 10:11 AM

Thanks, I’ve been visiting the site for quite some time, just decided it was time to go ahead and join.

View Bill White's profile

Bill White

4456 posts in 3425 days


#3 posted 06-01-2015 12:39 PM

Ya done good.
Glad to have you with us.
Bill

-- bill@magraphics.us

View HornedWoodwork's profile

HornedWoodwork

222 posts in 679 days


#4 posted 06-01-2015 02:07 PM

It might be a little hard to sell the saw without the accessories and fence, I’d be thinking twice about it, but you never know. Welcome aboard, glad to have you.

-- Talent, brilliance, and humility are my virtues.

View WoodNSawdust's profile

WoodNSawdust

1417 posts in 641 days


#5 posted 06-01-2015 02:11 PM

I think you got a good deal.

Like HornedWoodwork says a table saw without a fence may not sell well. Perhaps you could find a fence cheap somewhere to add to the saw.

-- "I love it when a plan comes together" John "Hannibal" Smith

View swdst's profile

swdst

44 posts in 556 days


#6 posted 06-01-2015 03:22 PM

Finding a fence is a possibility. Im not trying to make a killing on it, just want to get enough out of it to make it worth having been bought for the incra fence, incra miter system, the new dado stack, out feed roller, and wwll (looks about 3/4 life still in it)

View swdst's profile

swdst

44 posts in 556 days


#7 posted 06-01-2015 03:23 PM

Finding a fence is a possibility. Im not trying to make a killing on it, just want to get enough out of it to make it worth having been bought for the incra fence, incra miter system, the new dado stack, out feed roller, and wwll (looks about 3/4 life still in it)

View swdst's profile

swdst

44 posts in 556 days


#8 posted 06-01-2015 08:38 PM

After three hours of cleaning, waxing, setting up the incra system and aligning the blade (got it to 0.002), aligning the rip and miter fence, i have to say I’m in love with the incra fence and miter system. My first 45° miter on this saw and fence system, when flipped, gave me a no sanding, perfect fit, perfect to my square 90° I’ll post pictures later, site isn’t allowing it right now, so untill then, I’m gonna go make some swdst

View swdst's profile

swdst

44 posts in 556 days


#9 posted 06-01-2015 08:54 PM

View swdst's profile

swdst

44 posts in 556 days


#10 posted 06-01-2015 08:54 PM

View swdst's profile

swdst

44 posts in 556 days


#11 posted 06-01-2015 08:56 PM

Only thing i need is a new roller for the infeed side of the fence (hence it sitting lower than the outfeed side), i think it’s $2 from incra, and a blade gaurd/splitter for the saw if i decide to keep it.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com