LumberJocks

Delta Table Saw Blade Question

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Mark731 posted 05-31-2015 06:20 PM 553 views 0 times favorited 2 replies Add to Favorites Watch
View Mark731's profile

Mark731

3 posts in 553 days


05-31-2015 06:20 PM

Topic tags/keywords: tablesaw blade

I just purchased a new Delta Contractor Saw (10 inch contractor saw #36-725). The directions specifically say to only use 10 blades with 5/8 inch arbor holes. I’m assuming that I can use my dado blade….just looking for some confirmation on this one before I ruin my new table saw.


2 replies so far

View MrUnix's profile (online now)

MrUnix

4213 posts in 1661 days


#1 posted 05-31-2015 06:27 PM

Read page 24 of the manual :)

Or just to make things easier, here is the relevant bit:

The use of a non-through cut is essential to cutting grooves, rabbets and dados. Non-through cuts can be made using a standard blade having a diameter of 10 inches or less, or a dado blade up to 13/16 inch wide with a diameter of 8 inches or less.

Cheers,
Brad

-- Brad in FL - To be old and wise, you must first be young and stupid

View jesinfla's profile

jesinfla

274 posts in 599 days


#2 posted 06-01-2015 01:09 AM

Yes, I just bought the same saw and you can use dado as MrUnix points out.

-- They said I could be anything... So I became Sarcastic! They also said making drawers is easy... I think they lied :(

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com