LumberJocks

My New Lathe

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Joseph Crivelli posted 09-03-2009 07:55 PM 652 views 0 times favorited 1 reply Add to Favorites Watch
View Joseph Crivelli's profile

Joseph Crivelli

44 posts in 2711 days


09-03-2009 07:55 PM

My Jet JWL-1220VS came yesterday at 08:55 AM EDT.
About 1 hour setup time.

The lathe stand is perfect for the tool and rock solid. The stand is 36×20 x 36 and made of 2×4s, 2×3s, and a top of ¾” plywood. I used 3 ½” and 4” deck screws to put it together.

I had a 2×2 x 12 blank cut from an old surplus piece of wood. Using a roughing gouge, I seemed to get the basics of rounding the blank down quickly. Being a total turning novice, I was happy to see that I could do a simple operation without much trouble.

Thank you to all the members who gave me advice on the stand.

-- SOLTC


1 reply so far

View PurpLev's profile

PurpLev

8523 posts in 3108 days


#1 posted 09-03-2009 08:06 PM

congratulations!

-- ㊍ When in doubt - There is no doubt - Go the safer route.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com