LumberJocks

toddbeaulieu's Favorites

  • Advertise with us
View Gary Fixler's profile

002: a rolling base for my planer #7: parallel sliding dovetail drawer slides, part I

02-03-2010 12:39 PM by Gary Fixler | 12 comments »

Last time in this series I put together some drawer boxes. Next they’d need slides, and for that I went with parallel sliding dovetails, which I first saw GaryK create in walnut here. I’ve wanted since I saw those early last year to try my hand at making some. I spent some time one night last week building a SketchUp model based on GaryK’s photos of his results and designed around a bit I had from the Incra set, then wrote up a plan of attack for how to go about building the...

Read this entry »


View Don W's profile

dw- Plane notes from the field #4: How to set a bench plane chip breaker.

06-07-2012 12:50 AM by Don W | 21 comments »

A while ago on the “Hand Planes of your Dreams” thread there was a video pointed out that showed how the angle of the chip breaker affected the planes performance. The thing it didn’t show was how the mouth affected performance as well. It showed that a 80 degree angle on the chip breaker works better than a 50 degree. I checked and most of the planes I have were pretty close to an 80 degree bevel anyhow. At some point I’d like to see if the angle really makes a differ...

Read this entry »


View JL7's profile

The Basement #10: Incra Router Table - Template Holder

12-28-2010 04:09 AM by JL7 | 6 comments »

Before getting into the specifics, I should say, this won’t mean much unless you own an Incra positioner, but if you don’t own one, they really do a great job in repeatable cuts, unmatched actually. In the past 2 years, I have purchased 3 different Incra setups off of Craigslist for less than 50 cents on the dollar. I gave one of them to my Dad, and still have the Ultra which I’m using on this router table, along with the TS LS (table saw linear screw) on my table saw....

Read this entry »


View mafe's profile

How to use a Kerfmaker (trying to help out!) Blog.

09-21-2010 09:14 PM by mafe | 39 comments »

How to use a KerfmakerOk, many asked me this question, and I have seen it again and again on LJ. If you need to find out how to make one, you can see my Kerfmaker 'Brass'n wood'. Another fun gadget is the tenonmarker:http://lumberjocks.com/projects/39236 I’ll try to explain, as well as I can, feel free to ask questions if I do not make myself clear (I’m only human): Collect what is needed, in this case a base stock and two thinner side stocks, and of course a Kerfmaker...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com