LumberJocks

Tool Cabinet

  • Advertise with us
Blog series by tinnman65 updated 04-21-2009 11:41 PM 2 parts 7871 reads 18 comments total

Part 1: Tool Cabinet

03-12-2009 04:34 AM by tinnman65 | 11 comments »

Well it’s finally warm enough to do some woodworking out in my shop so I decided to start a tool cabinet to hold the few planes I own & any other hand tools that would fit in it. I have plans to build a bigger cabinet that is transportable but for now this will do. My first criteria is that it will hold a Stanly #8 plane that I don’t currently have but hope to in the near future. I think that plane is near 24” long so the cabinet has to be long enough to hold it. I made a list of all the...

Read this entry »


Part 2: Tool Cabinet #2

04-21-2009 11:41 PM by tinnman65 | 7 comments »

Well after some time away from my shop because of the cold weather I did get back to this cabinet. I finished carving the sides to the best of my limited carving ability.While I was doing that I put the door panel and the case back in the veneer press, then I put the case together, and then finished the door after it was out of the press. I had to figure out how I wanted to fit the tools I have in the cabinet so I laid them out on some brown paper to give me some idea of were I was going. Any...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase