LumberJocks

timtan34c's Favorites

  • Advertise with us
View degoose's profile

Glue up of a woven board..

05-17-2009 10:31 AM by degoose | 19 comments »

This is just a little tip.. not the whole tutorial of how to cut and make a woven board.Basically you all can make the weave with the two accent stripes on each side.. right.[ ok just a length of the main timber with 2 stripes cut 1/16 or 1/8 ” thick and glued up. see the pics and work it out ]You can also make the background pieces from the other of the accent timbers the same width as the main weave less the accents.. ok so far.. so I don’t need to go though all that do I? PM m...

Read this entry »


View dewoodwork's profile

Beautiful end grain cutting boards free project plan

11-25-2007 07:31 AM by dewoodwork | 95 comments »

Construct these beautiful end grainCutting boards Hello fellow woodworkers,In the spirit of sharing woodworking knowledge I am writing this tutorial for anyone interested in constructing these beautiful end grain cutting boards. Take a look at the photos of the four styles I have made, or create your own pattern’s and follow the steps I have outlined in this tutorial. Questions and comments are welcome, enjoy. For this board I used maple, walnut, lyptus and purpleheart. White oak, wa...

Read this entry »


View Todd A. Clippinger's profile

Shop Skills #2: Card Scrapers the Video!

12-29-2008 03:43 AM by Todd A. Clippinger | 54 comments »

It’s Finally Here! I have completed my first feature woodworking video. This video shows how I sharpen my card scrapers. It is a simple process and I kept the instruction simple with some close-up video action. I hope this post goes smooth, it has taken me all day to figure out how to finish up the video and 3 attempts to get it online. So this is a pretty big moment. I can work on polished video later but I have to start somewhere. I hope that this video on sharpening ca...

Read this entry »


View kem's profile

Christopher Schwarz at Lie-Nielsen Hand Tool Event [video]

04-18-2008 04:49 AM by kem | 10 comments »

Last week’s event in Chicago was fantastic. Being a novice, I really learned a lot from the many demonstrations and from getting to play with some fine tools. A couple of highlights for me were being able to try out Chris Schwarz’s ebony infill smoothing plane (by Wayne Anderson) and hearing Jeff Miller discuss the design and production of his beautiful Cantata chair. I was disciplined enough not to buy anything, although when I got home I ordered a large shoulder plane (Veritas, ...

Read this entry »


View Tony's profile

Lattice Cutting board Help

09-11-2007 03:45 PM by Tony | 26 comments »

Update: 7 september 2010. As I do not have a lot of spare time for woodworking at the moment, I am submitting this blog for the contest, I hope you guys don’t mind that it is a little old Here is a link to the final projects- http://lumberjocks.com/projects/2542http://lumberjocks.com/projects/2559 http://lumberjocks.com/assets/pictures/projects/9436-438x.jpg?1233630507 After several e-mails requesting the plans for the Dan Walters cutting board I copied I decided to put some...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase