LumberJocks

how to make a 3 legged stool

  • Advertise with us
Blog entry by thatlabguy posted 1100 days ago 2491 reads 0 times favorited 3 comments Add to Favorites Watch

I have a lot of pieces of bitterbrush I want to use for the legs for 3 legged stools with Juniper as the seat. Note: it will be difficult to turn the legs on a lathe or to make the tenons in a typical fashion because the leg pieces are not straight but they are very sturdy and will add a lot of character to the stool. also, typical seat size would help also, thanks,

-- larry@juniperworksnaturally.com



3 comments so far

View Don W's profile

Don W

14595 posts in 1163 days


#1 posted 1100 days ago

I made this one using a router and a jig I built.

-- Master hand plane hoarder. - http://timetestedtools.com

View gagewestern's profile

gagewestern

300 posts in 1946 days


#2 posted 1100 days ago

use log tenon cuter for the seat size that depens on the seat thats useing it

-- gagewestern

View RTim's profile

RTim

60 posts in 1288 days


#3 posted 1100 days ago

These Veritas tenon cutters from Lee Valley might be what you’re looking for…

http://www.leevalley.com/US/wood/page.aspx?p=42299&cat=1,180,42288,42299

For a seat size, anywhere between 12” and 16” diameter…whatever feels comfortable.

-- Tim from MA -- "Well done is better than well said." - Benjamin Franlin

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase