LumberJocks

Shop Updates

  • Advertise with us
Blog series by teenagewoodworker updated 12-31-2008 06:58 PM 8 parts 22427 reads 100 comments total

Part 1: Table saw mobile station

06-14-2008 11:22 PM by teenagewoodworker | 5 comments »

i figured that i would start up just a little blog for my shop updates. instead of having a different one for each of the things that i make for my shop i will have one blog and blog about all of them. it may not always be consistent like i am putting in plans for my tablesaw station now but i might not start it for another month and might blog about something else in between but whatever. so now on to my plans for my table saw station. so here is the overall view here is the top. i...

Read this entry »


Part 2: Router Table! (finally)

06-28-2008 05:17 AM by teenagewoodworker | 16 comments »

well unfortunately i will not be able to have the table saw station that i was hoping for but a router table is something i need so i am making one on the side of my table saw. i started by cutting down all the MDF with my cousin pat’s (Anthrax) help. then i started putting the torsion box together. it is all based on where the bolts are for my table saw and in the center fitted for the rockler plate that i am planning on getting in the future just i don’t have the money now. so h...

Read this entry »


Part 3: Router Table #2

06-29-2008 06:00 AM by teenagewoodworker | 12 comments »

Well i got a good amount done today but not as much as i would have hoped. first i cut the slots for the t-tracks that will secure the fence. i ordered it and i don’t have it yet so i figured that i would cut the slots now so i can attach the router table to the saw and when i get the t-tracks just pop them in. now that everything having to do with the torsion box is completed (including the router being mounted, sorry no pictures) i will turn my attention to the legs. i just too...

Read this entry »


Part 4: Router Table #3 (with video)

06-29-2008 08:01 PM by teenagewoodworker | 20 comments »

alright so now everything except for the fence is put together and it is looking awesome. i added the apron and plugged all my holes with birch plugs just for the looks and i put on a coat of poly just to make the birch plugs turn brown because they are end grain so it looks cool, no other reason. i am planning on making the fence and also some form of dust collection and some storage for router bits and a couple other things. maybe even put some French cleats there. so here is a video...

Read this entry »


Part 5: Router Table - Dust Collection

07-01-2008 02:14 AM by teenagewoodworker | 10 comments »

to make my routing work environment more enjoyable i added a few different dust collection systems to my router table. as well as showing the fence that i made for it. first I’ll start off with the fence. it has a 2” opening that goes up high about 3 1/2” to allow for higher bits. so the fence is about 6 inches high for maximum support. and about 2 inches longer than the router table on both sides for maximum work piece support on both the infeed and outfeed sides. so here i...

Read this entry »


Part 6: Router Table - Finished!

07-03-2008 12:21 AM by teenagewoodworker | 13 comments »

so my router table project has come to an end. i got my shipment from Lee Valley today and i am happy to say that everything is completed. first upon getting the 2’ T-track i cut it in half with a jigsaw and a metal cutting blade. then i epoxied the track into place. i used a board of mdf to distribute pressure and my two former table saw wings which are probably around 20 pounds each on top. then i just drilled for and installed the t bolts and put on the knobs. and when the fen...

Read this entry »


Part 7: finishing booth - table

12-27-2008 05:26 AM by teenagewoodworker | 13 comments »

well i have alot of finishing stuff. i am also getting a lot into the spraying so the chance arose to get my own little finishing booth in the corner of my attic right near 2 windows so of course i jumped on the opertunity. just to give you a perspective. after i cleaned out my finishing cabinet here was my stuff. and my table saw is 4 foot 3 inches by 27 inches so this is where i will cover the construction of the table. its not fine woodworking but my woodworking passion really c...

Read this entry »


Part 8: spray booth #2

12-31-2008 06:58 PM by teenagewoodworker | 11 comments »

well the spray booth is finally complete! i am so excited as it works wonderfully and i could not ask for a better spray booth. for now. and i can spray almost anything that i want now! so here is a picture of it from the outside. we just sectioned it off with some tarps to keep overspray from getting everywhere as well as make it a more enclosed space so the fan in the window will work better. then here is the inside. i have my nice big table for spraying as well as some halogen light...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase