Printer Table #1 (Basic Construction)

  • Advertise with us
Blog entry by teenagewoodworker posted 03-09-2008 02:50 AM 1582 reads 0 times favorited 8 comments Add to Favorites Watch

Hey Everybody In this episode of the Teenage Woodworker I go over some basic cabinet construction in the first part of a three part series where i make a printer table. There are a lot of technical things that i go over but try to stay with me for the whole episode. As always since i am only using a digital camera to film the sound is a little bad. so try to bear with me it helps to turn up the sound and sit a little bit away from the computer. this improves the sound a little bit. Well I hope that you enjoy this episode of the Teenage Woodworker.

Well i hope that everyone liked this episode. Next week i will go over covering up those nasty plywood edges with some 2 part molding, and edge veneer. i will also make the legs for the cabinet. Well i hope to see you again next week.

8 comments so far

View Woodshopfreak's profile


389 posts in 3980 days

#1 posted 03-09-2008 03:48 AM

Great show. Are you going to paint it or what? I wish I had a nailer, for now I just use glue, but I don’t have the money for a compressor. :( I’m still in the hole for my router table. lol. Great job useing the tools you have. When I make things I use my tablesaw. It saves alot of time instead setting up a stright edge. I hope to make some cabinets for my shop some day. My dad dosn’t want to hange them on a concrete wall because it will put holes in the wall that he doesn’t want. What kind of ply wood are you useing. Is it Birch ply, or regular ply. I can’t wait to see the end result. Looks great so far.

-- Tyler, Illinois

View teenagewoodworker's profile


2727 posts in 4006 days

#2 posted 03-09-2008 04:28 AM

thanks. its pine ply and i think that i am gonna stain it. I’m not sure yet though i have to do some test pieces. i recently read an article on staining blotchy woods like maple and pine and it said to use a wood conditioner so i figure that I’ll try that.

View cajunpen's profile


14578 posts in 4303 days

#3 posted 03-09-2008 06:19 AM

Nice video. It sure is encouraging seeing you young woodworkers so involved in the craft and you guys are doing some great looking work.

-- Bill - "Suit yourself and let the rest be pleased."

View grovemadman's profile


556 posts in 4009 days

#4 posted 03-09-2008 09:09 AM

Good show Lad, Do yourself a favor annd lay your router on its siide and bit facing away from you when you plug it in. If the switch just happens to be ON you’ll be glad you did. Remember safaty first!!
Keep up the good work the table should turn out nice.

-- --Chuck

View teenagewoodworker's profile


2727 posts in 4006 days

#5 posted 03-09-2008 06:09 PM

ya me and my dad are in the cleaning and straitening out stage right now. one we get our shop cleaned and organized I’m getting a couple of workmates so i can get up of the floor.

View Billinmich's profile


245 posts in 3969 days

#6 posted 03-09-2008 09:32 PM

Nice job.Is this how Norm started out?

-- Bill in Mich

View teenagewoodworker's profile


2727 posts in 4006 days

#7 posted 03-09-2008 11:38 PM

I’m not sure. i think he was just on this old house and a guy was impressed and offered him the show. maybe someone will see mine be impressed and offer me a show when I’m older. who knows?

View dlcarver's profile


270 posts in 3968 days

#8 posted 03-11-2008 11:39 PM

YOU ARE GOOD AT IT. Thanks for the positive comment.

-- Dave Leitem,Butler,Pa.,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics