LumberJocks

Woodworking on a Half-Shoestring #54: Hitachi C10FL Acquisition - Part 3 (Assembled)

  • Advertise with us
Blog entry by Paul Bucalo posted 08-21-2015 11:39 PM 1287 reads 0 times favorited 2 comments Add to Favorites Watch
« Part 53: Hitachi C10FL Acquisition - Part 2 Part 54 of Woodworking on a Half-Shoestring series Part 55: Seasoned Maple Boards »

Assembly was finished late this afternoon. Tests showed I could achieve 90 degree accuracy between blade and table top, but from front to back of the blade in relation to the miter slots I was at least a sixteenth off in the back. Still some vibration after startup. Not having been run for a year has made some of the pivots a little stiff. As it was, I had to lube the angle pivots. A little more TLC. The manual doesn’t explain how to deal with blade to miter slot adjustment. A search on the Web brought me to a forum post that reiterated what Hitachi told him: four bolts holding the trunnion to the bottom of the top need to be loosened and the assembly moved as needed. Typical. Tomorrow. I’m done for this day.

-- -- Paul Bucalo, Norwich NY USA



2 comments so far

View luv2learn's profile

luv2learn

2464 posts in 1767 days


#1 posted 08-22-2015 02:56 PM

Nice job of restoring your table saw Paul. It looks new. A little more tweaking and you are done.

-- Lee - Northern idaho~"If the women don't find you handsome, at least they ought to find you handy"~ Red Green

View Paul Bucalo's profile

Paul Bucalo

623 posts in 824 days


#2 posted 08-22-2015 03:04 PM

Thanks, Lee. :)

-- -- Paul Bucalo, Norwich NY USA

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com