Tablesaw fence
I have an old contractor type saw which I think is great, it’s a bit like the old Delta it has round bar type rails front & rear it crosscuts great but the fence never settles accurately. I has a link rod running through the fence to a a locking bar that tightens up on the back rail & I ‘ve sprayed it all with silicone to try & reduce friction still no luck. When I set it exactly from my mitre slides the next move ment may be ok or as much as a 1/32” out. I’ve tried adjusting the tension to the rear clamp but it’s still varies. If I have an accurate cut I have to check measure every cut. I live in the UK & fence systems like you have in the St...
