LumberJocks

Big Rig by T& J #3: dressing up the inside

  • Advertise with us
Blog entry by svfdfireman posted 07-29-2016 04:04 AM 455 reads 0 times favorited 6 comments Add to Favorites Watch
« Part 2: Wheels and glue up Part 3 of Big Rig by T& J series Part 4: Back from vacaion »

I stayed out of the shop the last few days. Got back this afternoon. Looking at the plans for the Rig, I realized that the interior was going to be totally empty. searching in the scrap pile, I found some wood and created a few things. They are all in need of sanding. But the idea and size seen to work

Gas, break, and clutch peddle are red ceder. The seats are walnut with ceder, the gear shift is maple, turned on a drill press, and cut with a sharp screwdriver. The housing is ceder. The dash board will have a ceder glove box and maple gauges ans switches. The steering wheel is maple, now if I could only fit a 60” flat screen.

-- Tommy SVFD Fireman



6 comments so far

View ralbuck's profile

ralbuck

1965 posts in 1727 days


#1 posted 07-29-2016 04:58 AM

Looking like a real interior Good ideas.

-- just rjR

View Jim Jakosh's profile

Jim Jakosh

17123 posts in 2566 days


#2 posted 07-29-2016 11:05 AM

Nice detail you are putting into it.

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View bruce317's profile

bruce317

206 posts in 283 days


#3 posted 07-29-2016 01:34 PM

What they said.
Things like this is what make Ownership of the build.

-- Bruce - Indiana

View htl's profile (online now)

htl

2175 posts in 620 days


#4 posted 07-29-2016 02:47 PM

Great work, the two tone seats will set off the interior.

-- There's a hundred ways to do anything, alot depends on the tools at hand.

View GR8HUNTER's profile

GR8HUNTER

1134 posts in 173 days


#5 posted 07-29-2016 02:57 PM

confused …. as usual …..LOL ….......don’t the plans call for this stuff ??

-- Tony Reinholds,Pa. REMEMBER TO ALWAYS HAVE FUN

View svfdfireman's profile

svfdfireman

30 posts in 169 days


#6 posted 07-29-2016 08:15 PM

Toys and Joys plan 32 does not have any interior items. the seats were from left over 1930 Packard plans, the steering wheel and dash is from the WW2 jeep, and the rest is from looking at what other wood workers do on LJ

-- Tommy SVFD Fireman

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com