LumberJocks Woodworking Forum banner

Tobacco Box build

Tags
video
5K views 31 replies 13 participants last post by  superdav721 
#1 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
 

Attachments

See less See more
1 12
#2 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
looks like the horse shoe is working well!
 

Attachments

#3 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Here ya go Don
 

Attachments

#4 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Nice work Super !
 

Attachments

#5 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Thanks Glen!
 

Attachments

#6 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
With such a nice tobacco box, Ya may never give up the vice of tobacco!!!

I missed that video last time. Great stories!!!
 

Attachments

#7 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Hi Dave. Thanks for the entertaining and instructive video. Very nice work on the dovetails and and all the rest too. I am wondering if that wrench is a pipe wrench except I didn't see any teeth on the jaws.
 

Attachments

#8 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
I likes it a lot. I do like yer horseshoe also. Yer gettin to be quite the forger, you are, IM
 

Attachments

#9 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Randy, Noooooooooooo! I like my pipe and a good cigar. The cigarets are just convenient.
Thanks Pres!
~
Mike it what I think a plumping wrench. Made for square objects. My dad called them a monkey wrench. There are no teeth. I need it for twisting square stock while forging. I have a small one and needed one for bigger stock. I just filled the handle with 24 hour resin and did not get all the holes plugged up. What a sticky mess. I will be pealling plastic off for the next few days. Oh well.
~
Thank you Mr. Jewelery maker.
~
Have a great year guys.
 

Attachments

#10 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Dave great video ,very informative on your build ,i watched you video a while back on dove tails and now can make them r at least getting better thanks for taking the time to share ,you may should of been a teacher thanks again my friend ,you really are getting good at these videos
 

Attachments

#11 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Eddie you are to kind. Well I work with 3000 teacher for the last 12 years may bee something rubbed off. I am a visual person, because of that I may not say what I need to in the video. I assume you know it. I need to speak more.
As always Eddie, You the man
 

Attachments

#12 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Nice box. You could not have bought one nice as that one these days.
You are rubbing off on me too much though.
You told me a long time ago that one day my house would be filled with my wood working projects.
I told you that wouldn't happen because I did not consider any of my work nice enough.
Well I was sitting in here yesterday and noticed something.
My house is getting full of my wood working projects.
You can't look in any direction without seeing something I built.
Back to the box now.
Hand cut dovetailed make make anything, even a simple tobacco box, look elegant.
And you sir, are the master at hand cut dove tails.
Great job.
 

Attachments

#13 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
William you make me smile. Now you have me looking around my house and the I have the same problem. You know what else, there are a few of your pieces here as well. Knowing that I think there should be a piece of mine at yours.
Thank you William you are a kind friend.
 

Attachments

#14 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Well Dave, I've had flights delayed for weather, mechanical problems, and missing flight crew, but tonight was the first time for all three.

Sitting here with a Jack and you're videos and I don't care. Good job my friend.
 

Attachments

#15 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
I do have a project of yours at MY house Dave. I have a wooden tape measure you made.
I mistated that earlier.
There is so much of my work here at my wife's house.
You know my house is over at the shop.
 

Attachments

#16 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Don I am glad to entertain.
Sorry about the flight problem.
I used to fly a bit and I don't miss it.
Good luck and dream of tools.
~
I hear ya William. That is a small project. I am going to better that one.
Yes its my wifes house as well.
I have spent a lot of time personalizing my shop. All I need now is a hammock. I think I want to tie one myself. With some good wood for the header and footer.

~
Thanks guys. A lot.
~
Oh Don drink one for me. I do miss that.
 

Attachments

#17 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Dave- How do you make the groove so it doesn't show with the dovetails? Do you stop the groove just shy of where the tail or pin start?
 

Attachments

#18 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Charles on this project I just ran the grove out the ends of the board. After I glued the box up I made little plugs and glued them in. I then used a flush cut saw then planed them down. I did not take the time to line the grain up and if you look at the video you can see this. The cypress has some nicely pronounced grain and it is easy to see. You could lay out you tails where the dado will not com out the end of the tail. Then just deal with the grove on the pin board. It would take way to much effort with a plow plane to do a stop cut.
Thanks for the question.
 

Attachments

#19 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
enjoyd to see the old gang working ….... :)
you ain´t affraid all the tobaco dry out before smoked …lol
love the rustick look of that box …

I noticed one time your plough seems to dig in very shortly
the same thing happened when I thought I had finished my restoring on mine
and I was hurrying in and assambled it for making a test run to get a little fun …. yah right …not so
suddently it started to dig in havely over and over again so I barely cuold move it forward
descover I need to clean the escape mauth for shavings that glogged the plane
just to see the that my new to me old irons was thinner than the old so the wedge got
alot closer to the mouth and in that possition was way too blunt and blocked the shavings
and if that wasn´t enoff also descovered the second skate (the one after the mouth )
can move up and down 1-1½mm or so …. can´t get the inbored pinscrews out since
the slot for the screwdriver is somehow destroyed …....

now it is ….... I scream for help …... any ideas …. how to fastene the scate again
I don´t have a drillpress ….. as it is now it will never sing again

take care
Dennis
 

Attachments

#20 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Thank you Dennis. Sometimes my wife will go to the tobacco discount store and come back with a bunch of goodies for me to smoke. Thinking of that I need some good pipe tobacco.
Dennis thanks for the plow tips. The one I have is so sloppy. It is very old and a mess to set up. I will look at the second skate. That does make good since. My wedge needs work as well. It is to tight in two directions.

Tool Font Fashion accessory Metal Titanium


Dennis can you not drill a smaller hole in the screw and use an ease out to remove the broken screw. Or chisel the entire area around the screw and replug it with a dowel.
Thanks for stopping by!
 

Attachments

#21 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Hey Dave- Nice blog but that ain't a horseshoe! That is a mule shoe. Probably just as lucky though.
 

Attachments

#22 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
those pinscrews are only 3-4 mm ….. I have a full set of those you show
and it don´t do the trick :-(
have thought of removing wood but that will be a big mess before I can get in with a plier
and removing one side of wood from the scate is an idea I´m not happy about since
I wont have any control of where the scate end under a new glue up

Dennis
 

Attachments

#23 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Mule shoe. Well if I aint a jack ass. Oh well I hope he was a lucky mule. Thanks Andy, I think I like it even more now.
~
Dennis that is tiny. Can you get a roto tool at it with a cut off disk. Cut another slot in the screw and turn it with a flat headed screw driver?
Best of luck Dennis. Sounds like you have a real hard one to remove.
 

Attachments

#24 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Dave- He wasn't too lucky. He lost his shoe!That shoe looks pretty old and was probably from a Mississippi cotton mule.
 

Attachments

#25 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
It is very old. It was found off a field on a plantation.
Mississippi cotton mule, that almost has a ring to it.
 

Attachments

#26 ·
Tobacco Box build

I have been in the need for a larger tobacco box. My pipes, cigars and loose tobacco have out grown my old box. It the video I take cypress dovetail and cut the dadoes by hand. The galoot level of this project is high. I also remove the rust from an old wrench and horseshoe. The shoe is for hanging above my anvil to poor the luck in to the projects I am building. The shoe was found at an antebellum home near Vicksburg MS.
Table Wood Workbench Tool Hardwood


Wood Hardwood Wood stain Plank Lumber


Wood Natural material Wood stain Hardwood Plank


Wood Wood stain Hardwood Gas Plank


Wood Wooden block Wood stain Floor Hardwood


Wood Automotive tire Mallet Hardwood Tool



I will be posting this as a project as well.
Thank you.
Dave, do I remember something like a sign that says "jackass at work" or something like that hung on the door of your shop?
If my memory is correct, now you have a mule's shoe, I think we have a theme going here.

Stubborn as a mule. Does things his own way. Refuses to go with the flow and buy the latest and greatest power tools. He sticks with his own ways and is a galoot at heart. He is jackass Dave.

I like it.
We need to run with that and make up a theme song from it for your videos now, like Stumpy.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top