LumberJocks

Richard's Favorites

  • Advertise with us
View degoose's profile

How to make a endgrain tumbling block butcher block board!

1837 days ago by degoose | 48 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »


View Tony's profile

Lattice Cutting board Help

2538 days ago by Tony | 26 comments »

Update: 7 september 2010. As I do not have a lot of spare time for woodworking at the moment, I am submitting this blog for the contest, I hope you guys don’t mind that it is a little old Here is a link to the final projects- http://lumberjocks.com/projects/2542http://lumberjocks.com/projects/2559 http://lumberjocks.com/assets/pictures/projects/9436-438x.jpg?1233630507 After several e-mails requesting the plans for the Dan Walters cutting board I copied I decided to put some...

Read this entry »


View Don W's profile

dw- Plane notes from the field #3: dw's Plane Resource sites

1152 days ago by Don W | 14 comments »

NOTE: I edit this and add sites from time to time. Also note I am not associated with most of these in any way. Also, just because its listed, It is NOT a referral, some I’ve used, some I have not. Use it as if you found it on your own. Please take a look at my blogsPlane Restoration How toTips for Setting up a bench planeAnd many more General:The mother of all Stanley information http://www.supertool.com/StanleyBG/stan0a.htmlhttp://www.cs.cmu.edu/~alf/en/antique-tool-faq.txt ...

Read this entry »


View Don W's profile

Planes restored - Because I can. #7: Sharpening. Its all in your head.

1145 days ago by Don W | 6 comments »

Edited 1-12-2014 Edited to add some notes for plane restoration and for further free hand instructions and clarifications. I use an 8” aluminum oxide wheel for my bench grinder. And yes I’ve put the cover back on. I can still burn a blade if I’m not reasonably careful, but It works fairly well. I like the 8” wheel because the hollow in the bevel is smaller, making for a stronger edge. I also made this bench guide similar to one in one of Krenov’s boo...

Read this entry »


View Brad's profile

Vintage Tool Rehab Projects #2: Disston #4 backsaw rehab-Part 2-Sharpening, testing and adding to tool kit

1231 days ago by Brad | 12 comments »

I’ll be honest. The thought of sharpening all those little teeth, with their attendant geometries has always intimidated me. But so did tuning my first Stanley Bailey Type 11 smoother. And what I’ve learned from tuning my planes is that I understand my tools and the way they shape the wood on a much more intimate level. And that’s made me a better woodworker. I wanted to have that same understanding for my handsaws. And I wanted to have the confidence and skill to sharpen...

Read this entry »


View Brit's profile

The Humble Hand Brace - A Beginner's Guide to Restoring, Buying and Using #6: Part 6 - What to Look for when Buying a Secondhand Brace and more

1075 days ago by Brit | 39 comments »

I thought I’d mix it up a bit in this part of the blog and record a video where I: Discuss what to look for when you pick up a secondhand brace and consider buying it. Mention variations in design and size and why you would use one size over another. Address Racerglen’s question on restoring plated braces. Answer lysdexic’s question as to why the Yankee 2100 represents the pinnacle of brace development. YouTube only allows uploads up to 15 minutes in length (...

Read this entry »


View Don W's profile

Planes restored - Because I can. #9: Plane Restoration, roll it together with a Millers Falls #10

1073 days ago by Don W | 28 comments »

So, I bought this bunch of planes in this pile which is shown with all the other weekend finds. Included at the bottom of the pile was this Millers Falls #10. NOTE: This blog is not a suggestion to strip every plane and repaint. I actually would suggest otherwise if the japanning is in reasonable condition. Some are not savable and I don’t like tools that look terrible. If you can save it, I’d recommend that. If not, strip it. I figured since this plane needed almost any...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase