LumberJocks

stevematis's Forum Topics

  • Advertise with us
View stevematis's:homeworkshopprojects (19)blog (0)reviews (0)forum topics (3)buddies (0)favorites (1)activity logWatch
07-31-2017 03:24 PM

How to price this job - 22 replies

I have to make a riser for a steel cabinet.The riser is 40×28x15.I used 1 pc. 2×4, 1 sheet 3/4×4x8 BC plywood, 1 sheet 1/4×4x4 birch plywood, 30 pcs of wood srew, 12 ft. of oak glue on edge veneer, 4 can of black spray paint.I spent on this job 12 hours. What would be the fair price for a friend and for somebody else? I...

03-24-2013 07:31 PM

Reverse spindle rotation - 0 replies

I have a small mini wood lathe, which has a control box for the revolution of the main spindle. It has only one spindle direction. I made some simple modification in order to run the spindle in reverse direction. Cut the cable between the control box and the motor. Installed a connector to end of the cable on the control box side.Installed a dou...

11-24-2012 03:11 AM

Maple end grain darken at finish - 2 replies

I am making 10 pcs. of small bowle, where the middle piece is hard maple, the top and the bottom pieces are dark hard wood.As I touch the maple with ANY coat (wax, oil, etc.) it will be darker at the end grain. I couldn’t sell the bowl this way!Any advice would help


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com