LumberJocks

Performax 22-44 paper loading tool

  • Advertise with us
Blog entry by spaids posted 1405 days ago 2255 reads 4 times favorited 8 comments Add to Favorites Watch

On a review of the Performax 22-44 some of the jocks were saying they don’t use the little paper changing tool. It works so well I am convinced that they must not be using it right. So this is the tool.

Its only to be used on the clip on the right side. The other clip is not made the same way and your finger really is the easiest tool for that one. Now just hook the tool in the hole in the top of the clip.

Pull the handle straight out.

Then turn it counter clockwise and slip the notch in the handle onto the lip of the drum.

If you start by clipping in the paper on the left side and wrap it towards the right, you can slip it under the lip of the tool where it grabs the drum and then you have two free hands, a tightly wrapped drum, and the end of the paper right there ready to be tucked in. When you release the tool the clip grabs the paper and the pulls tight and takes up any slack that was left.

Hope this helps.

-- Wipe the blood stains from your blade before coming in.--



8 comments so far

View SPalm's profile

SPalm

4759 posts in 2483 days


#1 posted 1405 days ago

I have that tool for my 15/32. I had forgotten how to use it so I just change it manually, which is really not so bad. But I will go give it a second look. I remember that is was pretty cool.

Thanks for the reminder,
Steve

-- -- I'm no rocket surgeon

View HokieMojo's profile

HokieMojo

2097 posts in 2329 days


#2 posted 1405 days ago

That’s really the tool? I thought you rigged up one of those bike rack hooks. lol. I’d love one of those sanders. I’m done getting tools this year though unless they are free (-:

View Jerry's profile

Jerry

209 posts in 2140 days


#3 posted 1405 days ago

I have the Jet 22/44 and do not have “The Tool”......
Time to call the local supplier….thanks!

-- Jerry - Rochester, MN *Whether you think you can or you can't, you are probably right* - Henry Ford

View closetguy's profile

closetguy

744 posts in 2493 days


#4 posted 1405 days ago

I don’t know how you change the paper without the tool. It makes it quick and easy.

-- I don't make mistakes, only design changes....www.dgmwoodworks.com

View Woodwrecker's profile

Woodwrecker

3562 posts in 2177 days


#5 posted 1405 days ago

I think you just helped a lot of guys Spaids.

-- Having fun...Eric

View ellen35's profile

ellen35

2557 posts in 2034 days


#6 posted 1405 days ago

Spaids,
Just ordered the 16-32… I have small hands but I will try that tool again (could never get it to work on the 10-20).
Thanks for the instruction. You should write the Jet manual!
(for the 10-20, I just make a very curved needlenose plier to pull the paper tight)
Ellen

-- "Don't let the perfect be the enemy of the good." Voltaire

View GaryK's profile

GaryK

10262 posts in 2590 days


#7 posted 1358 days ago

Hmm… It takes me less than 5 seconds to tuck the paper in using my finger. I don’t remember the last time I saw that little tool.

-- Gary - Never pass up the opportunity to make a mistake look like you planned it that way - Tyler, TX

View NBeener's profile

NBeener

4806 posts in 1775 days


#8 posted 1358 days ago

$8.64

$6.50 for shipping to the lower 48.

http://www.tools-plus.com/jet-98-0060.html

My fingers do the job, though.

-- -- Neil

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase