|View skozub's:||home||workshop||projects (4)||blog (0)||reviews (0)||forum topics (2)||buddies (0)||favorites (9)||activity log|
|03-08-2008 09:07 PM||
I’m putting a larger cove molding on a piece for a client that will need mitered returns. I’ll assemble the crown together before I attach it to the piece by using a glue-up jig that helps ensure the mitered joints come together at a 90 degree corner. The set up is a piece of MDF with a two pieces of wood at the corners that give me a perf...
|02-19-2008 02:09 AM||
I made a few zero clearance throat insert plates for my table saw this afternoon but when I went to use one I found that I couldn’t lower my blade far enough into the cabinet base to insert the new throat plate. Proper order should be: lower the blade all the way into the cabinet, drop in the new throat plate, place the fence over a small ...