scvwood27's Forum Topics

  • Advertise with us
View scvwood27's:homeworkshopprojects (4)blog (2)reviews (0)forum topics (30)buddies (0)favorites (0)activity logWatch
12-04-2015 02:00 AM

Transporting a PM66 - 12 replies

I need to transport a PM66 with a 50” rail about 150 miles on a trailer. Looking for some tips and advise to make the trip with minimal damage to the saw. Years ago I transported a contractor saw on a trailer and the bouncing of the motor bent the motor mount plate. Trying to avoid any damage if possible. Please help.

11-28-2015 08:50 AM

Festool Domino - 7 replies

Is any other company going to attempt to create a domino machine that is somewhat affordable?

11-26-2015 06:16 PM

Table Saw Selection - 5 replies

So I’ve got it down to two saws.Both used, hobby work, and in really good condition.PM 66 = 1500OrDelta Uni X5 =1200Both made in USA and 3 HP single phase. What to do?

11-21-2015 10:22 PM

Plans - 4 replies

Anybody have the SEP/OCT issue of WW Journal they are willing to share? I’m looking for the plans for the “Multipurpose Outfeed Cart” located inside that issue.

04-22-2015 03:56 PM

Table Saw in the Los Angeles area - 9 replies

Came across this saw on CL this morning. Sweet deal for a well kept saw with an excellent fence and some upgrades. If I were looking for an inexpensive starter saw, I would jump on this.

04-16-2015 01:16 PM

Grizzly Sale - 15 replies

I recieved a flyer in the mail yesterday from Grizzly for a Spring/Summer sale showing the G0690 reduced to $1150. I checked the web site and still see it at $1395, even though the Spring/Summer sale was suppose to start yesterday. I entered the pricing code on the back of the flyer but it shows invalid. Did anybody else receive this flyer and h...

02-24-2015 11:57 PM

Walnut turned white. - 12 replies

Made a frame from walnut. Sanded it, cleaned it with mineral spirits, let it dry and finished it with spray satin lacquer. Why ?

02-20-2015 04:33 PM

Table Saw Dilemma - 11 replies

So I finally got the OK by the watch commander (wife) to purchase a new table saw. Decided on the Grizzly 1023rlw, but Grizzly said it is unavailable until mid April. My draw to the RLW is the built in router table and the price. My other option is the 0690 but it is more expensive and no router extension. The router extension would be $300 more...

01-19-2015 09:06 PM

Grizzly G0555 - 7 replies

Is $400 a reasonable price for a Grizzly G0555 14 inch bandsaw is excellent condition with 2 blades and a mobile base?

12-30-2014 10:57 PM

Jointer and Bandsaw - 10 replies

The watch commander (Aka My Wife) authorized a $1000 budget for some new toys in the shop. I need a jointer and bandsaw. Considering the budget, I was looking at a 6in jointer and 14 in bandsaw from Grizzly. For the work I will be doing, I don’t think I will need anything bigger then a 6 in jointer and a 14 in saw. What combination of Griz...

12-25-2014 09:43 PM

looking for a jointer ..... - 18 replies


12-16-2014 10:31 PM

Jet Jointer - 1 reply

What is a fair price for JET – JJ-6HHDX 6-Inch Long Bed Helical Head Jointer in almost new condition?

11-11-2014 02:37 AM

Table Saw question - 7 replies

Loo.king for a used/inexpensive table saw for my father-in-law who will probably not be using it all that much, mostly hobby work. What do you think of this one:

10-08-2014 05:23 PM

ridgid jointer - 7 replies Is this worth the money?

10-02-2014 07:34 PM

Disc sander - 5 replies

Thoughts on a disk sander? Something worth buying or not so much? Small shop. If yes, what size disc?Thanks

07-16-2014 11:37 PM

Kreg Router Set-up Bars - 31 replies

Any thoughts on the Kreg bars? Seem rather pricey but has received good reviews. Any other alternatives out there that may be as efficient and less pricey?

07-09-2014 11:22 PM

Saw Blades - 21 replies

Looking to purchase a new thin kerf rip blade for my 1.5 HP Delta Table Saw. After reading several reviews, I have narrowed it down between the Diablo and Marples both 24 tooth count. Any thoughts on which one would be a better purchase? Price is about the same, somewhere around $30. Has anybody tried both and have a favorite? I see a lot of Di...

05-11-2014 02:23 PM

Planes - 17 replies

If you were going to purchase your first plane, where would you start? What do the numbers after the name mean? For example Stanley #3 or #4 …...

02-03-2014 08:50 PM

Router Speed - 2 replies

Anybody have a go by for router speed (router table) for different types of wood. I know the bigger bits need a slower speed, but I’m asking about regular size bits like 1/2 inch round overs and such. I had my Triton router on 3 with some pine and I was getting some tear out. The bit was brand new. Any info will help. Thanks

01-09-2014 09:01 PM

Festool - 16 replies

I hear such great things about Festool products. Will Festool ever make a table saw?

1 2 next »
30 topics

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics