LumberJocks

Making a Wood Bracelet with Scrappy

  • Advertise with us
Blog series by scrappy updated 1022 days ago 4 parts 16912 reads 35 comments total

Part 1: Step #1 Getting Ready/Choosing your Wood

1052 days ago by scrappy | 8 comments »

Hello all,I have been asked to give a class on making a wood bracelet similar to this one. http://lumberjocks.com/projects/18322 I want to point out that we will NOT be using the special jig I made. I have a different way to get the same results which does not require each of you making a jig. Part #1Getting started and choosing wood. Step #2Preparation off wood and cutting notches. Step #3Drilling holes and shaping. Step #4Finishing and final assembly We will begin be goin...

Read this entry »


Part 2: Preparing Wood and Cutting Pieces

1045 days ago by scrappy | 3 comments »

Welcome Back! We will begin be going over some safety tips. First of all it is always important to know your tools and use them safely. You will be working with very small pieces of wood so, the utmost care is needed. Always use all guards and a zero clearance blade on the table saw. Always use proper eye and ear protection. If something does not seem safe, then stop Step ONE The first thing you want to do is to cut your wood to size. I started with a piece of 4/4 Purple ...

Read this entry »


Part 3: Step #3 Drilling Holes and Shaping

1031 days ago by scrappy | 9 comments »

Making a Wood Bracelet with Scrappy: Step #3 First I want to remind every one to be VERY careful! Always keep safety in mind when doing your projects. In this step we will be drilling the holes for the pins and shaping the pieces. Once you have all of your pieces cut to size ( step #1 ) and the notches cut ( step #2 ), you can get ready to drill the holes for the hinge pins. You will need:Suitable material for a hinge pin. ( in my first one I used brad nails. ) I got some wire fr...

Read this entry »


Part 4: Part #4 Finishing and Final Assembly

1022 days ago by scrappy | 15 comments »

Welcome Back! We will begin be going over some safety tips. First of all it is always important to know your tools and use them safely. You will be working with very small pieces of wood so, the utmost care is needed. Always use all guards and a zero clearance blade on the table saw. Always use proper eye and ear protection. If something does not seem safe, then stop! Step #4 In this section we are going to be doing our Final Sanding, Finishing and Assembly of the bracelet. ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase